From: Liu_Liao (liu_liao@yahoo.com.tw)
Date: Thu Dec 14 2006 - 12:01:46 ART
Hi All,
I apply the rate-limt of multicast but I can see anything on my router
interface FastEthernet0/0
ip address 150.100.2.5 255.255.255.0
ip pim sparse-mode
ip multicast rate-limit out group-list 10 100
ip igmp join-group 239.255.8.8
duplex auto
speed auto
!
access-list 9 deny 239.255.0.0
access-list 9 permit any
access-list 10 permit 239.255.8.8
tp#sh ip mrou
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
L - Local, P - Pruned, R - RP-bit set, F - Register flag,
T - SPT-bit set, J - Join SPT, M - MSDP created entry,
X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
U - URD, I - Received Source Specific Host Report
Outgoing interface flags: H - Hardware switched
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.255.8.8), 00:03:52/00:00:00, RP 0.0.0.0, flags: DPL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list: Null
(*, 224.0.1.40), 00:03:52/00:00:00, RP 0.0.0.0, flags: DCL
Incoming interface: Null, RPF nbr 0.0.0.0
Outgoing interface list:
Serial0/0, Forward/Sparse, 00:03:52/00:02:28
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:38 ART