From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Dec 06 2006 - 11:47:17 ART
In the real lab you will not have access to the BB routers. That being
the case you should get very comfortable with using the various show
commands along with your configuration to know what your neighbor
router's routing table looks like (or possibly their BGP table). I
would highly recommend that you practice this as much as possible.
Brian Dennis, CCIE4 #2210 (R&S/ISP-Dial/Security/SP)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CharlesB
Sent: Tuesday, December 05, 2006 8:38 PM
To: ccielab@groupstudy.com
Subject: Do we have access to BB routers in the lab
at least for show commands, to see if we are doing the requirement
correctly
for test reasons? If BB routers are learning required routes, etc or
not?
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:37 ART