From: tdt_cciesec (tdt_cciesec@yahoo.com)
Date: Tue Dec 05 2006 - 15:10:15 ART
What do you mean by 5.0 requires two interfaces to do inline?
If that is true, then the IDS 4210 should be able to do "inline" right because the IDS 4210
has two interface but it can NOT. Only 4215 or higher can do in-line (that's what I've been
told at Cisco networkers ask the engineer booth). You need at least one interface for
management while the other two interfaces for inline. Cisco 4210 can only IDS 5.x but only
in passive mode and not in-line.
"Christopher M. Heffner" <cheffner@certified-labs.com> wrote:
IPS 5.0 requires two interfaces to do inline using "interface pairs".
IPS 5.1 and higher you can use one interface and uses "VLAN pairs".
HTH.
Christopher M. Heffner, CCIE 8211, CCSI 98760
Strategic Network Solutions, Inc.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jerry McVoy
Sent: Tuesday, December 05, 2006 12:10 AM
To: security@groupstudy.com; ccielab@groupstudy.com
Subject: IPS In-line
How many interfaces do you need on an IPS sensor to do in-line mode?
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:36 ART