From: VirtRack.com Mailing Lists (ciscolists@gmail.com)
Date: Sat Dec 02 2006 - 23:19:28 ART
I'd have to agree, not supported outbound:
(SVI)
SW1(config-if)#service-policy output marking
QoS: policymap is not supported on virtual interfaces
('switchport' physical interface)
SW1(config-if)#service-policy output marking
Warning: Assigning a policy map to the output side of an interface not
supported
On 12/2/06, Bob Sinclair <bob@bobsinclair.net> wrote:
>
> Victor,
>
> From everything I can see, the 3560 supports only the "service-policy
> input"
> command on a physical port or an SVI. The Doc CD is pretty clear about it,
> and I get nothing but errors when I try a service-policy out on an SVI.
>
> HTH,
>
>
> Bob Sinclair
> CCIE 10427 CCSI 30427
> www.netmasterclass.net
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Victor Cappuccio
> Sent: Saturday, December 02, 2006 7:42 PM
> To: ccielab@groupstudy.com
> Subject: Can the 3560 police traffic outbound?
>
> I mean many different SVIs routing to a Vlan 2 Internet Access, can I do
> a service policy outbound to this SVI?
>
> Or this must be done inbound?
>
>
>
> Thanks for the clarification in advance
>
> Victor.-
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Online rack rental and CCIE Forums at http://www.virtrack.com
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:36 ART