From: Victor Cappuccio (vcappuccio@desca.com)
Date: Sat Dec 02 2006 - 23:08:34 ART
Thanks you Bob, Sorry I forgot to mention that I do not have a Physical
Switch to Test, just Dynamips.
So In regards to my question, I need to do then a hierarchical policy
map in the SVI (inbound) for every Vlan that I want to rate-limit the
traffic?
Or Should I inbound rate-limit the traffic in the Egress Vlan?
Both the same?
Mis respetos
Victor.-
-----Original Message-----
From: Bob Sinclair [mailto:bob@bobsinclair.net]
Sent: Saturday, December 02, 2006 9:59 PM
To: Victor Cappuccio; ccielab@groupstudy.com
Subject: RE: Can the 3560 police traffic outbound?
Victor,
From everything I can see, the 3560 supports only the "service-policy
input"
command on a physical port or an SVI. The Doc CD is pretty clear about
it,
and I get nothing but errors when I try a service-policy out on an SVI.
HTH,
Bob Sinclair
CCIE 10427 CCSI 30427
www.netmasterclass.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Victor Cappuccio
Sent: Saturday, December 02, 2006 7:42 PM
To: ccielab@groupstudy.com
Subject: Can the 3560 police traffic outbound?
I mean many different SVIs routing to a Vlan 2 Internet Access, can I do
a service policy outbound to this SVI?
Or this must be done inbound?
Thanks for the clarification in advance
Victor.-
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:36 ART