Re: VPN3K - Authentication

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Thu Nov 30 2006 - 04:04:01 ART

Kal,

just for others to know too :)

In order to enable Telnet/Ssh Access you need

1) Enable Telenet under Configuration->System->Management Protocols
2) Use your configured administator account (under Administration ->
Access Rights -> Administrators ) to log in

Also remember that since 4.1 you can not use Telnet over SSL to connect
to VPN 3k anymore (well, as per the Release Notes :)

HTH

2006/11/30, Kal Han <calikali2006@gmail.com>:
>
> Hi
> I am trying to configure management access for
> VPN3K using some protocol ( telnet or ssh etc ).
> But I dont know how to assing the users
> for authentication.
> How can I create an username/password and
> use it for telnet authentication ?
> I tried assigning it to the basegroup.
> It didnt work.
> when I try to telnet to vpn3k, I get username/password
> prompt but I dont know how to create users to be used
> for telnet authentication.
> Any help is appreciated.
>
> Thanks
> Kal
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
> 

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com

Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344

This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART