From: WorkerBee (ciscobee@gmail.com)
Date: Wed Nov 29 2006 - 15:36:19 ART
The error is on S0/0 and not S0/1, can you post the output for R1 and
R5 as well as the "show frame-relay map"?
On 11/30/06, Udo <ccie_groupstudy@yahoo.de> wrote:
> No..it seems not to be the problem..
> here you can see the configs
>
> R3
> .....
> interface Serial0/0
> ip address 167.1.135.3 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 167.1.135.1 301 broadcast
> frame-relay map ip 167.1.135.5 305 broadcast
> no frame-relay inverse-arp
> !
> interface Serial0/1
> no ip address
> encapsulation frame-relay
> no frame-relay inverse-arp
> !
> interface Serial0/1.34 point-to-point
> ip address 167.1.34.3 255.255.255.0
> frame-relay interface-dlci 314
> des FR to Router 4
> !
> interface Serial0/2
> ip address 167.1.13.3 255.255.255.0
> desc Serial To Router3
> !
> interface Serial0/3
> no ip address
> shutdown
> !
> router eigrp 10
> network 150.1.3.3 0.0.0.0
> network 167.1.13.3 0.0.0.0
> network 167.1.34.3 0.0.0.0
> network 167.1.135.3 0.0.0.0
> network 204.12.1.3 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.3.3
>
> Router 4:
>
> interface Serial0/0
> ip address 167.1.34.4 255.255.255.0
> encapsulation frame-relay
> frame-relay map ip 167.1.34.3 413 broadcast
> no frame-relay inverse-arp
> !
> !
> interface Serial0/1
> ip address 167.1.45.4 255.255.255.0
> ip bandwidth-percent eigrp 10 25
> clock rate 64000
> desc Serial To Router 5
> !
> router eigrp 10
> redistribute rip metric 100000 100 255 255 1500
> network 150.1.4.4 0.0.0.0
> network 167.1.34.4 0.0.0.0
> network 167.1.45.4 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.4.4
> !
> .....
>
> THX
> Any help for me ?
>
> Udo
>
> > EIGRP set neighbor relation on IP from the same subnet. Probably on yuor
> > ppp-link IP addresses from different networks.
> >
> > On Wednesday 29 November 2006 19:03, Udo wrote:
> > > Hi GS
> > >
> > > I had the following environment
> > >
> > > R1-----(FR)----R3---(FR)----R5
> > >
> > >
> > >
> > > FR
> > >
> > >
> > > R4
> > >
> > > R3 is as hub configured for R1 and R5 (ip address x.x.135.x)
> > > And R4 is via point-to-point with R3 connected
> > > All of this routers are configured with EIGRP
> > >
> > > On R3 I get the following message
> > > ===============================
> > > *Mar 1 01:54:27.157: IP-EIGRP(Default-IP-Routing-Table:10): Neighbor
> > > 167.1.34.4 not on common subnet for Serial0/0
> > > ==============================
> > > S0/0 is the INterface which connects to R1/R5
> > >
> > > What should be the possible reason for this ?
> > >
> > > THX
> > > Udo
> > >
> > >
> > >
> > >
> > >
> > >
> > > ___________________________________________________________
> > > Der fr|he Vogel fdngt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail:
> > > http://mail.yahoo.de
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> ___________________________________________________________
> Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART