From: WorkerBee (ciscobee@gmail.com)
Date: Wed Nov 29 2006 - 02:49:03 ART
Quick Start Wizard as the name implies, allows you to do quick
configuration with some friendly prompt to allow you to bring up the
bare minimum services as soon as possible.
Configuring from Quick Start is the same as Main Menu. Just that is an
interactive session. For Main Menu method, you need to know the Tree
Like structure to start configuring the box.
If you are studying for the lab exam, try to avoid Quick Start method.
On 11/29/06, Lab Rat #109385382 <techlist01@gmail.com> wrote:
> Ok this is actually a practice lab question, which is why I'm asking...
>
> I see the solution as configured from the Quick start wizard, but as there
> are "enable" checkboxes for PPTP and L2TP consistent with the Quick start
> wizard, there is none for IPSec...
>
> I just want to know what the wizard disables...anyone know for sure?
>
>
> -----Original Message-----
> From: WorkerBee [mailto:ciscobee@gmail.com]
> Sent: Tuesday, November 28, 2006 9:40 PM
> To: techlist01@gmail.com
> Cc: cisco@groupstudy.com; Cisco certification; security@groupstudy.com
> Subject: Re: VPN-Concentrator Question
>
> I don't use the Quick Start Wizard. Then you can navigate to public filter
> to remove ESP etc or you can disable it from Per User Group - IPSec if IPSec
> is required for other user groups.
>
> You can go ahead with Full Configuration via >> Click here to go to the Main
> Menu link.
>
> http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_getting_start
> ed_guide_chapter09186a00801f0aef.html#wp1067086
>
>
> On 11/29/06, Lab Rat #109385382 <techlist01@gmail.com> wrote:
> > Where do you see that selection? Do you mean from the Public
> > *Filter*? If so, is that really the equivalent of doing so at the Quick
> start wizard?
> >
> >
> > -----Original Message-----
> > From: WorkerBee [mailto:ciscobee@gmail.com]
> > Sent: Tuesday, November 28, 2006 9:30 PM
> > To: Lab Rat #109385382
> > Cc: cisco@groupstudy.com; Cisco certification; security@groupstudy.com
> > Subject: Re: VPN-Concentrator Question
> >
> > Remove it from the Public Interface Filter.
> >
> >
> > On 11/29/06, Lab Rat #109385382 <techlist01@gmail.com> wrote:
> > > Does anyone know of a way to disable the IPSec protocol on the VPN-C
> > > without using the Quick startup wizard?
> > >
> > > I see it gives you a choice in the Quick startup wizard, but I
> > > cannot find how to disable it in the CLI or GUI.
> > >
> > > Thanks,
> > >
> > > Ed
> > >
> > > ____________________________________________________________________
> > > __ _ Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART