From: Tandou Mohamed (dtandou@yahoo.com)
Date: Tue Nov 28 2006 - 22:51:07 ART
Hello Group,
i am trying to figure out something about EIGRP. the scenario said configure EIGRP between a router and the backbone. after configuring eigrp you will see some routes coming from the backbone. when i configured my eigrp i am getting K-value mismatch. since i will not have access to the backbone router during the exam to find out what the K-Value. i run some debug command like debug eigrp packets and debug ip eigrp # neighbor a.b.c.d to find out the k-value nothing is specified. Can someone tell me how to find out the k-value?
thanks,
Mohamed
.Nov 28 13:09:37.877: EIGRP: Sending HELLO on Loopback0
.Nov 28 13:09:37.877: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
.Nov 28 13:09:37.877: EIGRP: Received HELLO on Loopback0 nbr 136.10.6.6
.Nov 28 13:09:37.877: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0
.Nov 28 13:09:37.877: EIGRP: Packet from ourselves ignored
.Nov 28 13:09:38.861: EIGRP: Received HELLO on Serial1 nbr 136.10.69.9
.Nov 28 13:09:38.861: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0
.Nov 28 13:09:38.861: K-value mismatch
.Nov 28 13:09:38.861: EIGRP: Sending HELLO on Serial1
.Nov 28 13:09:38.861: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
.Nov 28 13:50:38.429: EIGRP: Received HELLO on Serial1 nbr 136.10.69.9
.Nov 28 13:50:38.429: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0
.Nov 28 13:50:38.429: K-value mismatch
---------------------------------
Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get things done faster.
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:49 ART