From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sun Nov 26 2006 - 17:56:02 ART
Yes this is the expected behavior.
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Raj Bansal
Sent: Sunday, November 26, 2006 12:51 PM
To: ccielab@groupstudy.com
Subject: ppp queston
when i enable ppp on a frame relay link, assign it a virtual template
and then assign an ip to the virtual template, i am not able to ping my
own ip. Is this normal?
hence
int s0/0.1
frame-relay interface-dlci 205 ppp virtual-template 1
int virtual-template 1
encap ppp
ip address 1.1.1.1 255.255.255.0
i can't seem to ping 1.1.1.1 but i can ping the far end.
Thanks.
Raj
---------------------------------
Everyone is raving about the all-new Yahoo! Mail beta.
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART