RE: Monitoring a Line.

From: Victor Cappuccio (vcappuccio@desca.com)
Date: Fri Nov 24 2006 - 16:47:33 ART


Hi,

This one
IP7POZ02#show ver | in s7
Cisco IOS Software, s72033_rp Software
(s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(33)SRA1, RELEASE
SOFTWARE (fc4)
System image file is
"bootdisk:s72033-adventerprisek9_wan-mz.122-33.SRA1.bin

Also seems that is not supported in GSRs with this IOS.

IP1COL01#monitor traffic line ?
% Unrecognized command
IP1COL01#conf ter
Enter configuration commands, one per line. End with CNTL/Z.
IP1COL01(config)#arch
IP1COL01(config)#arch
                   ^
% Invalid input detected at '^' marker.

IP1COL01(config)#^Z
IP1COL01#show ver |
Nov 24 15:46:21.823 UTC: %SYS-5-CONFIG_I: Configured from console by
vcappuccio on vty0 (10.18.176.82)
IP1COL01#show ver | in IOS
IOS (tm) GS Software (C12KPRP-K4P-M), Version 12.0(32)SY1, RELEASE
SOFTWARE (fc1)
IP1COL01#

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Martin Kiefer
Sent: Viernes, 24 de Noviembre de 2006 12:16 p.m.
Cc: ccielab@groupstudy.com
Subject: RE: Monitoring a Line.

 Wich IOS?

Rack1R6#monitor traffic line ?
  <0-326> TTY line on which to monitor traffic
  aux Auxiliary line
  console Primary terminal line
  tty Terminal controller
  vty Virtual terminal
  x/y Slot/Port for Modems
  x/y/z Slot/Subslot/Port for Modems

Rack1R6#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(8), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 15-May-06 14:54 by prod_rel_team

/Martin

> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Victor Cappuccio
> Sent: Friday, November 24, 2006 4:23 PM
> To: Josef A
> Cc: ccielab@groupstudy.com
> Subject: RE: Monitoring a Line.
>
> IP7PLC01#monitor traffic line
>
> ^
>
> % Invalid input detected at '^' marker.
>
>
>
> IP7PLC01#conf ter
>
> Enter configuration commands, one per line. End with CNTL/Z.
>
> IP7PLC01(config)#line con 0
>
> IP7PLC01(config-line)#monitor traffic line
>
> ^
>
> Does not seems to be supported
>
>
>
> I saw that in the IE Cods but it did not worked
>
>
>
> Thanks Man
>
> Victor.-
>
>
>
>
>
>
>
> ________________________________
>
> From: Josef A [mailto:josefnet@gmail.com]
> Sent: Viernes, 24 de Noviembre de 2006 11:16 a.m.
> To: Victor Cappuccio
> Cc: ccielab@groupstudy.com
> Subject: Re: Monitoring a Line.
>
>
>
>
>
> Victor,
>
>
>
> Here is another command you can also try:
>
>
>
> "monitor traffic line"
>
>
>
> HTH
>
> Josef
>
>
>
>
>
>
>
>
>
> On 11/24/06, Victor Cappuccio <vcappuccio@desca.com> wrote:
>
> Hi Guys, is there a Way to monitor what a user is doing in a
> Router, without using AAA?
>
>
>
> IP7PLC02#show users
>
> Line User Host(s) Idle Location
>
> 1 vty 0 sc idle 00:01:36
> 10.18.187.200
>
> * 2 vty 1 vcappuccio idle 00:00:00 10.19.8.54
>
> 3 vty 2 vcappuccio idle 00:01:08 10.19.8.54
>
>
>
>
>
> Thanks
> Victor.-
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART