From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sat Nov 25 2006 - 00:18:10 ART
With the current IOS releases you cannot monitor a VTY or CON line with this command, only an AUX, or TTY line:
Rack8AS#sh ver | in IOS|image
IOS (tm) 2500 Software (C2500-C-L), Version 12.3(1a), RELEASE SOFTWARE (fc1)
System image file is "flash:c2500-c-l.123-1a.bin"
Rack8AS#monitor traffic line ?
<0-118> TTY line on which to monitor traffic
aux Auxiliary line
console Primary terminal line
tty Terminal controller
vty Virtual terminal
Rack8AS#monitor traffic line con 0
% Can't monitor a console line
Rack8AS#monitor traffic line vty 1
% Can't monitor a virtual terminal line
Rack8AS#monitor traffic line aux 0
Monitoring outbound traffic on line 17. Type ^^x to end.
Finished.
Rack8AS#monitor traffic line tty 1
Monitoring outbound traffic on line 1. Type ^^x to end.
Finished.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com <https://webmail.123together.com/exchweb/bin/redir.asp?URL=http://www.InternetworkExpert.com>
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com <https://webmail.123together.com/exchweb/bin/redir.asp?URL=http://forum.internetworkexpert.com>
Live Chat: http://www.internetworkexpert.com/chat/ <https://webmail.123together.com/exchweb/bin/redir.asp?URL=http://www.internetworkexpert.com/chat/>
________________________________
From: nobody@groupstudy.com on behalf of Martin Kiefer
Sent: Fri 11/24/2006 10:16 AM
Cc: ccielab@groupstudy.com
Subject: RE: Monitoring a Line.
Wich IOS?
Rack1R6#monitor traffic line ?
<0-326> TTY line on which to monitor traffic
aux Auxiliary line
console Primary terminal line
tty Terminal controller
vty Virtual terminal
x/y Slot/Port for Modems
x/y/z Slot/Subslot/Port for Modems
Rack1R6#sh ver
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version
12.4(8), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 15-May-06 14:54 by prod_rel_team
/Martin
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of Victor Cappuccio
> Sent: Friday, November 24, 2006 4:23 PM
> To: Josef A
> Cc: ccielab@groupstudy.com
> Subject: RE: Monitoring a Line.
>
> IP7PLC01#monitor traffic line
>
> ^
>
> % Invalid input detected at '^' marker.
>
>
>
> IP7PLC01#conf ter
>
> Enter configuration commands, one per line. End with CNTL/Z.
>
> IP7PLC01(config)#line con 0
>
> IP7PLC01(config-line)#monitor traffic line
>
> ^
>
> Does not seems to be supported
>
>
>
> I saw that in the IE Cods but it did not worked
>
>
>
> Thanks Man
>
> Victor.-
>
>
>
>
>
>
>
> ________________________________
>
> From: Josef A [mailto:josefnet@gmail.com]
> Sent: Viernes, 24 de Noviembre de 2006 11:16 a.m.
> To: Victor Cappuccio
> Cc: ccielab@groupstudy.com
> Subject: Re: Monitoring a Line.
>
>
>
>
>
> Victor,
>
>
>
> Here is another command you can also try:
>
>
>
> "monitor traffic line"
>
>
>
> HTH
>
> Josef
>
>
>
>
>
>
>
>
>
> On 11/24/06, Victor Cappuccio <vcappuccio@desca.com> wrote:
>
> Hi Guys, is there a Way to monitor what a user is doing in a
> Router, without using AAA?
>
>
>
> IP7PLC02#show users
>
> Line User Host(s) Idle Location
>
> 1 vty 0 sc idle 00:01:36
> 10.18.187.200
>
> * 2 vty 1 vcappuccio idle 00:00:00 10.19.8.54
>
> 3 vty 2 vcappuccio idle 00:01:08 10.19.8.54
>
>
>
>
>
> Thanks
> Victor.-
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART