From: Brad Ellis (brad@ccbootcamp.com)
Date: Wed Nov 22 2006 - 01:59:41 ART
Mohit,
Did you figure out your problem? Have you tried changing out your octal
cable as well? What about a different NM-16A? The configuration I emailed
you was straight from one of our working terminal servers.
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
Network Learning Inc - A Cisco Sponsored Organization (SO)
YES! We take Cisco Learning credits!
mailto:brad@ccbootcamp.com
http://www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
Racks)
http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: <Mohit.Sharma@sungard.com>
To: <ccielab@groupstudy.com>; <nobody@groupstudy.com>
Sent: Monday, November 20, 2006 4:54 AM
Subject: 2811 terminal server- OT
> Hi All,
>
> I have got 10 no.'s of 2811, which the customer wants to use as terminal
> servers for OB management.
> I installed NM-16A module and plugged the octel cables in consoles of
> Cisco 3750's and 2800's.
>
> I am not able to make this setup work. The reverse telnet is not working
> from even a single router. I have tried all the combinations of line
> variables. Here is the configs for line-
>
> line con 0
> password 7 0232015803535F284F
> logging synchronous
> line aux 0
> exec-timeout 0 0
> password 7 1316021C0C0D162E7A767B
> modem InOut
> transport input all
> line 0/2/0
> login local
> modem Dialin
> autoselect during-login
> autoselect ppp
> stopbits 1
> speed 115200
> flowcontrol hardware
> line 1/0 1/15
> no exec
> transport input telnet
> stopbits 1
> line vty 0 4
> password 7 140407050B05382F757A60
> login
> transport input telnet
> ------------------------------------
> the line 1/0 to 1/15 are mapped to tty- 66 - 85 under show line.
> I do a reverse telnet to port 2066 - 2085 but alays get connection
> refusedl.-
>
> 1/0 66 TTY 9600/9600 - - - - - 0 29577
> 56303/129912 -
> 1/1 67 TTY 9600/9600 - - - - - 0 0 0/0
> -
>
> -------------------------------
>
> rtr1#telnet 10.12.224.73 2066
> Trying 10.12.224.73, 2066 ...
> % Connection refused by remote host
>
> ------------------------------------
>
> This is the case for all the sites.
>
> Is there anything that I am missing here? This has got me frustrated since
> the last week, even got a call with TAC for more than 5 days now, but
> nothing from them yet.
> Is there any special port number for the 2800's?
> Any advice, recommendation, suggestions would be really welcome guys.
>
> Many Thanks,
> Mohit.
>
> ____________________________________________________
> Mohit Sharma
> CCIE #13642
> Technical Consultant
> SAS Limited
> mailto:mohit.sharma@sungard.com
> ____________________________________________________
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART