From: Mohit.Sharma@sungard.com
Date: Mon Nov 20 2006 - 09:54:00 ART
Hi All,
I have got 10 no.'s of 2811, which the customer wants to use as terminal
servers for OB management.
I installed NM-16A module and plugged the octel cables in consoles of
Cisco 3750's and 2800's.
I am not able to make this setup work. The reverse telnet is not working
from even a single router. I have tried all the combinations of line
variables. Here is the configs for line-
line con 0
password 7 0232015803535F284F
logging synchronous
line aux 0
exec-timeout 0 0
password 7 1316021C0C0D162E7A767B
modem InOut
transport input all
line 0/2/0
login local
modem Dialin
autoselect during-login
autoselect ppp
stopbits 1
speed 115200
flowcontrol hardware
line 1/0 1/15
no exec
transport input telnet
stopbits 1
line vty 0 4
password 7 140407050B05382F757A60
login
transport input telnet
------------------------------------
the line 1/0 to 1/15 are mapped to tty- 66 - 85 under show line.
I do a reverse telnet to port 2066 - 2085 but alays get connection
refusedl.-
1/0 66 TTY 9600/9600 - - - - - 0 29577
56303/129912 -
1/1 67 TTY 9600/9600 - - - - - 0 0 0/0
-
-------------------------------
rtr1#telnet 10.12.224.73 2066
Trying 10.12.224.73, 2066 ...
% Connection refused by remote host
------------------------------------
This is the case for all the sites.
Is there anything that I am missing here? This has got me frustrated since
the last week, even got a call with TAC for more than 5 days now, but
nothing from them yet.
Is there any special port number for the 2800's?
Any advice, recommendation, suggestions would be really welcome guys.
Many Thanks,
Mohit.
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART