From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Tue Nov 21 2006 - 04:40:50 ART
Did you turn off mroute caching under the interface (no ip mroute-cache)
on the router with the debugs?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Schulz, Dave
Sent: Monday, November 20, 2006 9:34 PM
To: ccielab@groupstudy.com
Subject: Multicast Helper Verification
I am looking to do the verification for the multicast helper
configuration. I believe the best way, is to set up the RTR application
using udpEcho on a router on the interface, then.... Using the debug on
the router to verify the broadcast to multicast conversion. However,
the debugs for ip mpacket do not provide the info. Has anyone been able
to do this successfully?
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART