From: Hafizur Rahman \(Europe\) (hafizur.rahman@uk.didata.com)
Date: Tue Nov 21 2006 - 06:18:47 ART
You will also be able to verify this with the RIP v1
-----Original Message-----
From: nobody@groupstudy.com on behalf of Schulz, Dave
Sent: Tue 21/11/2006 05:34
To: ccielab@groupstudy.com
Cc:
Subject: Multicast Helper Verification
I am looking to do the verification for the multicast helper
configuration. I believe the best way, is to set up the RTR application
using udpEcho on a router on the interface, then.... Using the debug on
the router to verify the broadcast to multicast conversion. However,
the debugs for ip mpacket do not provide the info. Has anyone been able
to do this successfully?
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
-----------------------------------------
Dimension Data - providing global IP based solutions and services
for over 20 years supported locally from a single point of contact.
This email is confidential. If you are not the intended recipient
then you must not copy it, forward it, use it for any purpose, or
disclose it to another person.
Please also note that the author of this email is not authorised
to; make any offers capable of acceptance unless expressly stated
in a validly dated and attached document which shall be subject to
the terms and conditions stated therein or, conclude any contract
on behalf of Dimension Data by email.
Although Dimension Data has taken reasonable precautions to ensure
no viruses are present in this email, the company cannot accept
responsibility for any loss or damage arising from the use of this
email or attachments.
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART