From: Xiang Yu (xiang.seanyu@gmail.com)
Date: Tue Nov 21 2006 - 01:43:04 ART
Do you have "neighbor ebgp" command configured on two spoker routers?
On 11/20/06, Lab Rat #109385382 <techlist01@gmail.com> wrote:
>
> If I have:
>
> - 3 different routers each in a unique BGP AS
> - configured a BGP confederation identifier of "123" on the three of them
> - configured BGP peer statements of the other two routers' AS on each
> router
>
> Is there some reason two of the routers won't peer? Two of my routers are
> stuck in "Active."
>
> FYI, the 3 routers are connected via hub-and-spoke Frame Relay, and only
> the
> hub router seems to peer with the other two routers...the two spokes will
> not peer. I have IP reachability between all three.
>
> The spokes peer just fine without the confederation...
>
> Is this normal?
>
> Thanks,
>
> Ed
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART