From: Michael Zuo (mzuo@ixiacom.com)
Date: Mon Nov 20 2006 - 21:42:00 ART
Hi Group,
I ran into something strange: I set my FR interface cir to 512K and my
policy-map shows the bandwidth is only 256K. can anyone shed some light
and tell me where I configured wrong?
Thanks a lot
R5(config-route-map)#do sh policy-m int s0/0
Serial0/0: DLCI 503 -
Service-policy output: Q2
Class-map: Q2 (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name Q2
Queueing
Strict Priority
Output Queue: Conversation 40
Bandwidth 100 (%)
Bandwidth 256 (kbps) Burst 6400 (Bytes)
(pkts matched/bytes matched) 0/0
(total drops/bytes drops) 0/0
Class-map: class-default (match-any)
14054 packets, 1010511 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
R5(config-route-map)#do sh run | be policy-m
policy-map Q
class Q
drop
policy-map Q2
class Q2
priority percent 100
!
interface Serial0/0
bandwidth 512
ip address 154.1.0.5 255.255.255.0
ip pim sparse-dense-mode
encapsulation frame-relay
no fair-queue
frame-relay traffic-shaping
frame-relay map ip 154.1.0.3 503
frame-relay map ip 154.1.0.4 503
frame-relay interface-dlci 503
class R3
no frame-relay inverse-arp
!
map-class frame-relay R3
frame-relay cir 512000
frame-relay bc 5120
frame-relay be 10240
service-policy output Q2
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:48 ART