From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Thu Nov 16 2006 - 05:53:28 ART
Hi.
I think yes.
If we are not allowed to tune "ip bandwidth-percent eigrp" we can just
do a quick math.
link BW = 128, desirable EIGRP BW% = 40%, => 51,2
default EIGRP BW% = 50% => tuned link BW = 51,2 * 2 = 100,4
Since there is no fraction in interface BW, we can go for bandwidth 101
to have at least 40% of 128 for EIGRP. (Or bandwidth 100 if we want less
that 40%)
I don't remember any other way of tuning this, nut you never know... :-)
A.
Dishan Gamage wrote:
> Hi
>
> I'm confused with eigrp bandwith setting on the interface...
>
> I have a serial0/0, on FR , want to configure eigrp to use 40% of interface
> bw (128K)
> how can i do it without ip bandwidth-percent command... ?
>
> can i configure using bandwidth command, ?
>
> is the default bandwith for eigrp 50% ?
>
> I m confused....pls let me know how its done
> reg
> dishan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART