From: Yoshe Rionando (Rionando@swadharma.com)
Date: Wed Nov 15 2006 - 05:49:43 ART
Hi Brian,
How to make a connection bettween 2 catalyst ( in Dynagen) in 2 separate
instance and separate machine.
Yoshe Rionando Y.
PT. Swadharma Duta Data
Network & System Engineering Dept.
Senior Network Engineer
phone : 62 21 8318881
fax : 62 21 8297293
mobile : 62 8159084895
"Brian McGahan" <bmcgahan@internetworkexpert.com>
Sent by: nobody@groupstudy.com
11/15/2006 12:50 PM
Please respond to
"Brian McGahan" <bmcgahan@internetworkexpert.com>
To
"Michael Zuo" <mzuo@ixiacom.com>
cc
<ccielab@groupstudy.com>
Subject
RE: Running Dynagen with IE topology
The EtherSwitch module NM-16ESW basically acts like the
layer 2 and layer 3 switching functions of the 3550. Create VLANs in the
VLAN database and apply them to the interfaces to create your broadcast
domains. Configure trunk links between SW1 and SW2 to span these
broadcast domains across both devices.
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
________________________________________
From: Michael Zuo [mailto:mzuo@ixiacom.com]
Sent: Tuesday, November 14, 2006 11:36 PM
To: Brian McGahan
Cc: ccielab@groupstudy.com
Subject: Running Dynagen with IE topology
Hi Brian,
Just a quick question, for the IE topology you posted for Dynagen, SW1 and
SW2 are simulated as routers. To be able to have connectivity between
routers, we need to configure bridging on SW1 and SW2 to simulate VLAN,
correct? Or there is a simpler way?
thanks
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:47 ART