From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Tue Nov 07 2006 - 06:26:41 ART
Hi.
as per DocCD... if I read it right, queue 1 is taken out from SRR for
expedite service.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/cr/cli1.htm#wp3281502
Follow these guidelines when the expedite queue is enabled or the egress
queues are serviced based on their SRR weights:
b"If the egress expedite queue is enabled, it overrides the SRR shaped
and shared weights for queue 1.
b"If the egress expedite queue is disabled and the SRR shaped and shared
weights are configured, the shaped mode overrides the shared mode for
queue 1, and SRR services this queue in shaped mode.
b"If the egress expedite queue is disabled and the SRR shaped weights are
not configured, SRR services the queue in shared mode.
haducbinh wrote:
> Hi GS!
>
> When we enable priority-queue by using: "(config-if)# priority-queue out"
>
> In Cat3550, queue 4 become priority-queue
>
> Please show me priority-queue ID of Cat3560!
>
> Thanks!
>
> HaDucBinh
> Mail: <mailto:haducbinh@vnpro.org> haducbinh@vnpro.org or
> <mailto:haducbinh@yahoo.com> haducbinh@yahoo.com
> Phone: +84 908 191 322
> ---------------------------------------------------------------------------
> Vietnamese Professionals (VnPro)
> Cisco Authorised Training
> 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi Minh City
> Tel: (08) 5124257 - (08) 5125314
> Fax: (08) 5124314
> Website: <http://vnpro.vn> http://vnpro.vn
> Support Forum: <http://vnpro.org> http://vnpro.org
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART