From: Venkataramanaiah.R (vramanaiah@gmail.com)
Date: Tue Nov 07 2006 - 01:39:37 ART
Hi Scott,
We have our IP throughout on top of SP's EoMPLS... but we do not want
to opt for the EoMPLS from the SP for this purpose.. We have HA built
in our network, so we would like to take advantage of it, instead of
going for an exclusive EoMPLS ckt..
Rgds
-Venkat
On 11/7/06, Scott Morris <swm@emanon.com> wrote:
> You'll need fairly current versions (check out Feature Navigator at
> www.cisco.com/go/fn) but more importantly, you'll need at least a Sup2 and
> 512M RAM on your 6500's for the software to do this.
>
> Now, what you didn't spell out is whether this is entirely your network
> (e.g. the middle WAN stuff too) or whether there is a service provider
> involved. If there's an SP, you can always get them to do all this fancy
> stuff for you! :)
>
> Cheers,
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> IPExpert VP - Curriculum Development
> IPExpert Sr. Technical Instructor
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Venkataramanaiah.R
> Sent: Monday, November 06, 2006 3:47 PM
> To: Brian McGahan
> Cc: ccielab@groupstudy.com
> Subject: Re: Bridging over IP
>
> Brian, this looks like a good option, but i guess this is supported on
> limited platforms and latest IOS..
>
> We are running some IOS which is atleast two years old and i am looking at
> doing this on MSFC at one end and 3745 on the other end, so i will need to
> explore the support..
>
> -Venkat
>
> On 11/6/06, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
> > Yes you can do this. If your transit network is pure IPv4 you
> > can run L2TPv3. If your transit network is running MPLS you can run
> > AToM. L2TPv3 is a very quick any easy way to accomplish this as
> > opposed to implementing MPLS just for this purpose. You simply
> > configure L2TPv3 tunnels between the border routers and all traffic
> > (IPv4, IPv6, IPX, NetBIOS, etc) received in the Ethernet interfaces
> > will be tunneled over to the other side of the link. Check here for
> configuration examples:
> >
> > http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/
> > hw
> > an_c/hl2tpv3.htm#wp1046175
> >
> >
> > HTH,
> >
> > Brian McGahan, CCIE #8593 (R&S/SP)
> > bmcgahan@internetworkexpert.com
> >
> > Internetwork Expert, Inc.
> > http://www.InternetworkExpert.com
> > Toll Free: 877-224-8987 x 705
> > Outside US: 775-826-4344 x 705
> > 24/7 Support: http://forum.internetworkexpert.com
> > Live Chat: http://www.internetworkexpert.com/chat/
> >
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > Venkataramanaiah.R
> > > Sent: Monday, November 06, 2006 11:09 AM
> > > To: ccielab@groupstudy.com
> > > Subject: Bridging over IP
> > >
> > > Hi,
> > >
> > > I would like to bridge two ethernet segments over an IP cloud...
> > >
> > > Is this possible? If yes, what options do i have..
> > >
> > >
> > > Regards
> > > -Venkat
> > >
> > >
> > ______________________________________________________________________
> > _
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART