From: Venkataramanaiah.R (vramanaiah@gmail.com)
Date: Tue Nov 07 2006 - 10:17:37 ART
Scott, Are you sure, you can use GRE or ipip... Bridging group
commands dont seem to be accepted under the tunnel i/f..
Btw, what are the other options apart from L2TPv3. Is there any
technique to use the traditional L2TP in some way to achieve this IP
over IP requirement?
L2TPv3 is ruled out due to hw/sw requirements in our case..
Regards
-Venkat
On 11/6/06, Scott Morris <swm@emanon.com> wrote:
> I'd hardly call DLSw legacy. It's in use many places still... In fact some
> router companies (Juniper) have just ADDED support for it. Go figure.
>
> Anyway, your alternative may be to create a few bridge groups and use a
> tunnel (GRE or ipip).
>
> Don't rule out one particular technology though, unless of course this is
> for a lab and they tell you not to use something!
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
> #153, CISSP, et al.
> CCSI/JNCI-M/JNCI-J
> IPExpert VP - Curriculum Development
> IPExpert Sr. Technical Instructor
> smorris@ipexpert.com
> http://www.ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Venkataramanaiah.R
> Sent: Monday, November 06, 2006 12:30 PM
> To: Dennis Dumont
> Cc: ccielab@groupstudy.com
> Subject: Re: Bridging over IP
>
> Hi Dennis, i am not looking for bridging legacy protocols.. I am interested
> in encapsulating IP over IP..
>
> On 11/6/06, Dennis Dumont <dfdumont@yahoo.com> wrote:
> > It's called DLSw.
> >
> > Go through the ocnfiguration guide sections under IBM protocols.
> >
> > I've used this to bridge not only the SNA mainframe stuff, but also
> > DECNet and even Netbeui (oh god PLEASE don't do that!)
> >
> > Make sure you use bridge filtering (access-list
> > 200-299)
> > to transmit only the SSAP and DSAP's appropriate for the traffic
> > you're bridging. Otherwise you'll end up with a nightmare the likes
> > of which are legendary.
> >
> >
> >
> >
> > ______________________________________________________________________
> > ______________
> > Sponsored Link
> >
> > Mortgage rates near 39yr lows. $420k for $1,399/mo.
> > Calculate new payment!
> > http://www.LowerMyBills.com/lre
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART