From: Capt.Spock (capt.spock@gmail.com)
Date: Mon Nov 06 2006 - 17:14:44 ART
> I see that Standby router is unknown in the R2 do sh stand command? Looks
> like R2 is not aware of R1.
>
> Can u ping R1 from R2?
>
>
>
>
>
> On 11/6/06, Udo <ccie_groupstudy@yahoo.de> wrote:
> >
> > Hi GS,
> >
> > I have configured HSRP in my lab.
> > Here is the config from both routers
> >
> > R1
> >
> > interface FastEthernet0/0
> > ip address 192.168.1.1 255.255.255.0
> > duplex half
> > standby 1 ip 192.168.1.254
> > standby 1 priority 50
> > standby 1 preempt
> > ================================================
> > R1(config-if)#do sh stand
> > FastEthernet0/0 - Group 1
> > State is Standby
> > 4 state changes, last state change 00:01:19
> > Virtual IP address is 192.168.1.254
> > Active virtual MAC address is 0000.0c07.ac01
> > Local virtual MAC address is 0000.0c07.ac01 (v1 default)
> > Hello time 3 sec, hold time 10 sec
> > Next hello sent in 1.448 secs
> > Preemption enabled
> > Active router is 192.168.1.2, priority 100 (expires in 7.412 sec)
> > Standby router is local
> > Priority 50 (configured 50)
> > IP redundancy name is "hsrp-Fa0/0-1" (default)
> > =======================================
> >
> > R2
> >
> > interface FastEthernet1/0
> > ip address 192.168.1.2 255.255.255.0
> > duplex half
> > standby 1 ip 192.168.1.254
> > standby 1 preempt
> > standby 1 track Serial2/0 100
> > end
> > ==================================================
> >
> > R2(config-if)#do sh stand
> > FastEthernet1/0 - Group 1
> > State is Active
> > 2 state changes, last state change 00:02:19
> > Virtual IP address is 192.168.1.254
> > Active virtual MAC address is 0000.0c07.ac01
> > Local virtual MAC address is 0000.0c07.ac01 (v1 default)
> > Hello time 3 sec, hold time 10 sec
> > Next hello sent in 2.208 secs
> > Preemption enabled
> > Active router is local
> > Standby router is unknown
> > Priority 100 (default 100)
> > Track interface Serial2/0 state Up decrement 100
> > IP redundancy name is "hsrp-Fa1/0-1" (default)
> >
> >
> > In the output you can see that are both routers active even if the R2
> > S2/0 up or down...
> > So what happens ?
> > I think R2 should be the active router until the S2/0 goes down ?! So if
> >
> > I shutdown the interface nothing happens
> > But I can see the priority decrements..
> >
> > ================================0
> > R2 after shutdown S2/0
> >
> > FastEthernet1/0 - Group 1
> > State is Active
> > 2 state changes, last state change 00:10:35
> > Virtual IP address is 192.168.1.254
> > Active virtual MAC address is 0000.0c07.ac01
> > Local virtual MAC address is 0000.0c07.ac01 (v1 default)
> > Hello time 3 sec, hold time 10 sec
> > Next hello sent in 1.472 secs
> > Preemption enabled
> > Active router is local
> > Standby router is unknown
> > >> Priority 0 (default 100)
> > Track interface Serial2/0 state Down decrement 100
> > IP redundancy name is "hsrp-Fa1/0-1" (default)
> >
> >
> > Please can anyone explain what is wrong ?
> >
> > Thanx
> >
> > Udo
> >
> >
> >
> > ___________________________________________________________
> > Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART