From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Nov 06 2006 - 09:25:28 ART
The newest dynamips release supports NM-16ESW (16 port etherswitch
module) that you can use for layer 2 switching and layer 3 routing.
I've posted some .net files to map to the Internetwork Expert topology
that you can find here:
http://hacki.at/7200emu/viewtopic.php?t=121
HTH,
Brian McGahan, CCIE #8593 (R&S/SP)
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Ben Holko
> Sent: Monday, November 06, 2006 5:33 AM
> To: ccielab@groupstudy.com
> Subject: RE: 7200 emulator
>
> if you're referring to Dynamips, then yes I have used the virtual
switch
> option an it worked fine
>
> but I will say, dont bother, and use Dynagen - it vastly simplifies
the
> Dynamips interface syntax
>
> the virtual switch in Dynagen is just that - a virtual switch - it
does
> not allow switch configuration practice, it merely emulates access and
> trunk ports
>
> use Dynagen in conjunction with Dynamips
>
>
>
>
> ________________________________
>
> From: nobody@groupstudy.com on behalf of Bozhidar Batev
> Sent: Mon 11/6/2006 9:41 PM
> To: ccielab@groupstudy.com
> Subject: 7200 emulator
>
>
>
> Has anyone tried virtual ethernet switch on 7200 emulator
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 01 2006 - 08:05:45 ART