From: Andy Hoang (ahoang@sbcglobal.net)
Date: Tue Oct 31 2006 - 18:31:25 ART
well obviously you'll get nothing on PC2 because fa0/2 is down. Is
fa0/2 disabled or err-disabled by any chance? do "sho int fa0/2" and
"sh mon session 1"
--- haducbinh <haducbinh@vnpro.org> wrote:
> Hi GS!
>
>
>
> I configuration Local SPAN!
>
> This is my topology:
>
> PC1--------(fas0/1)
>
> PC2--------(fas0/2)SW
>
> PC3--------(fas0/3)
>
>
>
> I want to configure fas0/1 is source SPAN, fas0/2 is destination
> SPAN, when
> I send traffic from PC3 to PC1, it will send copy traffic to PC2!
>
> This is configuration:
>
> SW(config)# monitor session 1 source interface fas0/1
>
> SW(config)# monitor session 1 destination interface fas0/2
>
>
>
> But when I "#show ip int brief", fas0/1 and fas0/3 is up/up, but
> fas0/2 is
> up/down. And when I send traffic from PC3 to PC1, PC2 don't receive
> any
> traffic!
>
> Where I'm wrong?
>
>
>
> Thanks!
>
> HaDucBinh
> Mail: <mailto:haducbinh@vnpro.org> haducbinh@vnpro.org or
> <mailto:haducbinh@yahoo.com> haducbinh@yahoo.com
> Phone: +84 908 191 322
>
---------------------------------------------------------------------------
> Vietnamese Professionals (VnPro)
> Cisco Authorised Training
> 149/1D Ung Van Khiem Street, Ward 25, Binh Thanh District, Ho Chi
> Minh City
> Tel: (08) 5124257 - (08) 5125314
> Fax: (08) 5124314
> Website: <http://vnpro.vn> http://vnpro.vn
> Support Forum: <http://vnpro.org> http://vnpro.org
>
>
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:07 ART