From: Roberto Fernandez (rofernandez@us.telefonica.com)
Date: Fri Oct 27 2006 - 13:25:09 ART
Ubaid,
Some time ago I tried two solutions which worked:
First Solution:
On each router
standby use-bia
On each port switch
Portsecurity secured address <mac address of the routers>
Second Solution:
On each router
Standby mac-address <static mac-address> (different for each
router)
On each port switch
Portsecurity secured address <mac-address configured on the
routers>
Regards,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ubaid Iftikhar (AU)
Sent: Friday, October 27, 2006 11:47 AM
To: ccielab@groupstudy.com
Subject: Port Security and HSRP
I know this topic has been discussed but I am looking for correct
solution
(which really works) using standby virtual address
Going through the past posts you can do this
interface FastEthernet0/17
switchport access vlan 100
switchport mode access
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address 4000.0000.0001
interface FastEthernet0/18
switchport access vlan 100
switchport mode access
switchport port-security
switchport port-security maximum 2
switchport port-security mac-address 4000.0000.0001
Found duplicate mac-address 4000.0000.0001.
I think I am going nuts almost 2 am in the morning
Help Guys
Ubaid
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART