From: Faryar Zabihi \(fzabihi\) (fzabihi@cisco.com)
Date: Tue Oct 24 2006 - 22:43:08 ART
http://www.cisco.com/en/US/products/ps6558/prod_bulletin0900aecd803f93d6
.html
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Aaron Weaver
Sent: Tuesday, October 24, 2006 3:18 PM
To: Group study
Subject: DMVPN AND TRAFFIC SHAPPING
I have a quick question about DMVPN.
Consider that you have a DS3 as a hub site and many 1.5 - 6 meg
connections as the branches. How do you control the bandwidth from the
hub site to the branch sites or the aggregated bandwidth from the branch
sites to the Hub. I know that with GRE over IPSEC I would have seperate
interfaces to do FRTS. With DMVPN I only have one. If anyone has any
input on this that would be great. The Cisco docs cover this as a
problem, but they don't provide a solution. (not one that I have found).
Side note: using 7600's with SPA module for hubs (no preclass for QOS)
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART