From: Aaron Weaver (aaron.weaver77@gmail.com)
Date: Wed Oct 25 2006 - 02:00:20 ART
It doesn't look like it's supported for the 7600. Does anyone no when
this feature will be released for the 7600.
On 10/24/06, Faryar Zabihi (fzabihi) <fzabihi@cisco.com> wrote:
>
>
> http://www.cisco.com/en/US/products/ps6558/prod_bulletin0900aecd803f93d6
> .html
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Aaron Weaver
> Sent: Tuesday, October 24, 2006 3:18 PM
> To: Group study
> Subject: DMVPN AND TRAFFIC SHAPPING
>
> I have a quick question about DMVPN.
>
> Consider that you have a DS3 as a hub site and many 1.5 - 6 meg
> connections as the branches. How do you control the bandwidth from the
> hub site to the branch sites or the aggregated bandwidth from the branch
> sites to the Hub. I know that with GRE over IPSEC I would have seperate
> interfaces to do FRTS. With DMVPN I only have one. If anyone has any
> input on this that would be great. The Cisco docs cover this as a
> problem, but they don't provide a solution. (not one that I have found).
>
> Side note: using 7600's with SPA module for hubs (no preclass for QOS)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART