From: Metin (metin.yildizli@gmail.com)
Date: Fri Oct 20 2006 - 11:55:15 ART
Hi,
It's OK for OSPF timers like that. But I mean that redundancy which task
says.
R4 and R5 be able to detect a fialure and PPP link should be the last
link to use.
If other two links gone then traffic should be sent over the PPP link.
How does OSPF timers resolve it?
Thanks...
Kemal YILDIRIM wrote:
> Hi Metin,
> By only setting the OSPF hello-interval, the dead-interval adjusted
> automatically to 4 times the hello-interval, in this scenario;
> hello-interval is adjusted to 2 second, it gives us 8 seconds dead-interval
> value, and this is lower than 10 seconds :-)
> And lastly the task is not asking the total convergence time, or a best
> practice solution
> HTH
> Kemal
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Metin
> Sent: Friday, October 20, 2006 11:31 AM
> To: Cisco certification
> Subject: Lab 4 Task 4.7
>
> Hi all,
> I think the solution of the task 4.7 is wrong or anyone can explain the
> solution?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:06 ART