From: CharlesB (cbalik@adelphia.net)
Date: Sun Oct 15 2006 - 20:41:36 ART
I see the output on this 3560!!
s1(config)#inter fa0/5
s1(config-if)#ser
s1(config-if)#service-policy ?
history Keep history of QoS metrics
input Assign policy-map to the input of an interface
output Assign policy-map to the output of an interface
s1(config-if)#service-policy ou
s1(config-if)#service-policy output ?
WORD policy-map name
s1(config-if)#service-policy output
s1#
07:18:17: %SYS-5-CONFIG_I: Configured from console by console
s1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
s1(config)#inter v
s1(config)#inter vl
s1(config)#inter vlan 28
s1(config-if)#ser
s1(config-if)#service-policy ?
history Keep history of QoS metrics
input Assign policy-map to the input of an interface
output Assign policy-map to the output of an interface
s1(config-if)#service-policy ou
s1(config-if)#service-policy output
s1#
s1#
s1#
07:18:38: %SYS-5-CONFIG_I: Configured from console by console
s1#sh ver
Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version
12.2(25)SE
D1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 22-Nov-05 23:18 by yenanh
Image text-base: 0x00003000, data-base: 0x01191EEC
ROM: Bootstrap program is C3560 boot loader
BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEB, RELEASE
SOFTWAR
E (fc)
s1 uptime is 7 hours, 18 minutes
System returned to ROM by power-on
System image file is "flash:/c3560-advipservicesk9-mz.122-25.sed1.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
--More--
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Simon Tee
Sent: Sunday, October 15, 2006 8:38 AM
To: Cagri Yucel
Cc: ccielab@groupstudy.com
Subject: Re: 3560 output rate-limiting
Hi,
I do not have the error output from the switch, will try to obtain that and
post here, but if you lookup the command reference for 3560 there's only
"service-policy input".
Seems like only support it "one way"
regards,
Tee
On 10/15/06, Cagri Yucel <cyucel@gmail.com> wrote:
>
> What is the exact error you are getting ? This also might be due to some
> stuff you've put into policy-map.
>
> 3550 supports this happily, so if you can not even apply an empty
> policy-map a good step might be to check your IOS version ? Does it have
IP
> support ? :)
>
>
> On 10/15/06, Simon Tee <teetengloong@gmail.com> wrote:
>
> > Hi guys,
> >
> > Wanted to enforce outgoing traffic bandwidth on a 3560 interface but
> > just
> > realized that 3560 do not allow for the command "service-policy output"
> > and
> > there's no rate-limit command available on the switch.
> >
> > Any idea how I can achieve this?
> >
> > Thanks and best regards,
> > Tee
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> -cagri
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART