From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Thu Oct 12 2006 - 08:59:14 ART
Unless you have multiple exit points between the different
protocol domains the routing metric is arbitrary. The reason why is
that if prefix X is only reachable through exit point A then the metric
through A is irrelevant; anyone wanting to reach prefix X must go
through A.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Povarenkin, Igor
> Sent: Wednesday, October 11, 2006 11:53 PM
> To: Alexei Monastyrnyi
> Cc: Cisco certification
> Subject: RE: Redistribution into EIGRP
>
> Hello GS,
>
> From which interface I need to use the "bandwidth delay reliability
> loading mtu"
> parameters?
>
> For example:
>
> (EIGRP domain) f0/0 [Router] s0/0 (RIP domain)
>
> Router# router eigrp 1
> redistribute rip metric 100000 100 255 1 1500
> OR
> redistribute rip metric 1544 2000 255 1 1500
> ?
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> > Behalf Of david robin
> > Sent: Wednesday, October 11, 2006 5:02 PM
> > To: Mohamed Saeed
> > Cc: ccielab@groupstudy.com
> > Subject: Re: Redistribution into EIGRP
> >
> > you can use redustribute ospf 1
> >
> > with setting metrics
> > but use with it
> >
> > Router(config-router)# *default-metric* *bandwidth delay
> > reliability loading
> > mtu *
> > as you must set a default metric for the distributed routes
> > or configure
> > them manulay
> >
> > best regards,
> >
> >
> >
> > On 10/11/06, Mohamed Saeed <mohamed_saeed2@rayacorp.com> wrote:
> > >
> > > Hi All,
> > >
> > >
> > >
> > > When redistributing from any IGP into EIGRP, should you
> > manually set the
> > > metric?
> > >
> > >
> > >
> > > Example:
> > >
> > >
> > >
> > > router eigrp 10
> > >
> > > redistribute ospf 1 metric 10000 100 255 1 1500
> > >
> > >
> > >
> > > Actually, I have tried to redistribute without specifying
> > the metric but
> > > I got improper operation and I do not know why. Has
> > somebody encountered
> > > this?
> > >
> > >
> > >
> > > Regards
> > >
> > > Mohamed Saeed, CCNP - CCIP
> > >
> > >
> > ______________________________________________________________
> > _________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > ______________________________________________________________
> > _________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART