From: Povarenkin, Igor (ipov@amt.ru)
Date: Thu Oct 12 2006 - 01:52:45 ART
Hello GS,
From which interface I need to use the "bandwidth delay reliability
loading mtu"
parameters?
For example:
(EIGRP domain) f0/0 [Router] s0/0 (RIP domain)
Router# router eigrp 1
redistribute rip metric 100000 100 255 1 1500
OR
redistribute rip metric 1544 2000 255 1 1500
?
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
> Behalf Of david robin
> Sent: Wednesday, October 11, 2006 5:02 PM
> To: Mohamed Saeed
> Cc: ccielab@groupstudy.com
> Subject: Re: Redistribution into EIGRP
>
> you can use redustribute ospf 1
>
> with setting metrics
> but use with it
>
> Router(config-router)# *default-metric* *bandwidth delay
> reliability loading
> mtu *
> as you must set a default metric for the distributed routes
> or configure
> them manulay
>
> best regards,
>
>
>
> On 10/11/06, Mohamed Saeed <mohamed_saeed2@rayacorp.com> wrote:
> >
> > Hi All,
> >
> >
> >
> > When redistributing from any IGP into EIGRP, should you
> manually set the
> > metric?
> >
> >
> >
> > Example:
> >
> >
> >
> > router eigrp 10
> >
> > redistribute ospf 1 metric 10000 100 255 1 1500
> >
> >
> >
> > Actually, I have tried to redistribute without specifying
> the metric but
> > I got improper operation and I do not know why. Has
> somebody encountered
> > this?
> >
> >
> >
> > Regards
> >
> > Mohamed Saeed, CCNP - CCIP
> >
> >
> ______________________________________________________________
> _________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> ______________________________________________________________
> _________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART