From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Oct 11 2006 - 23:10:21 ART
Set the configuration register to 0x2101 (conf t -> config-register
0x2101) and then reboot the router. This will make the flash read/write
and allow you to delete the IOS image. This link has all the details.
http://www.cisco.com/en/US/products/hw/routers/ps233/products_tech_note0
9186a00800941aa.shtml#cancun_upgrade_proc
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tandou Mohamed
Sent: Wednesday, October 11, 2006 5:23 PM
To: ccielab@groupstudy.com
Subject: IOS download
Hello everyone,
i am trying to download an ios into my 2500 router. i am getting this
errors message:
%Error: Image size exceeds free space
%FLH: Flash download failed
when i do sh flash this is what i get:
BB1#sh flash
System flash directory:
File Length Name/status
1 12940544 c2500-js-l.20oct2001
[12940608 bytes used, 3836608 available, 16777216 total]
16384K bytes of processor board System flash (Read ONLY)
i know there is not enough space. The problem is during the before the
download the router does not ask erase flash before download.
How do i change processor board System flash to (Read/Write)
Thanks,
SD
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great
rates starting at 1"/min.
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART