From: Daniel Kutchin (daniel@kutchin.com)
Date: Wed Oct 11 2006 - 23:06:59 ART
Ooops, I didn't read your mail completely:
You also need to set the config-register to 0x2101
The flash will then be read-write.
Daniel
-----Original Message-----
From: Daniel Kutchin [mailto:daniel@kutchin.com]
Sent: Donnerstag, 12. Oktober 2006 04:01
To: 'ccielab@groupstudy.com'
Subject: RE: IOS download
Use the command:
erase /no-squeeze-reserve-space flash:
The "/no-squeeze-reserve-space" option frees up an otherwise reserved space.
Daniel
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
CharlesB
Sent: Donnerstag, 12. Oktober 2006 03:26
To: Tandou Mohamed; ccielab@groupstudy.com
Subject: RE: IOS download
Try the "squeeze" command
R4#squeeze ?
/quiet Squeeze without progress update
flash: Filesystem to be squeezed
R4#squeeze f
R4#squeeze flash: ?
<cr>
R4#squeeze flash:
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Tandou Mohamed
Sent: Wednesday, October 11, 2006 5:23 PM
To: ccielab@groupstudy.com
Subject: IOS download
Hello everyone,
i am trying to download an ios into my 2500 router. i am getting this
errors message:
%Error: Image size exceeds free space
%FLH: Flash download failed
when i do sh flash this is what i get:
BB1#sh flash
System flash directory:
File Length Name/status
1 12940544 c2500-js-l.20oct2001
[12940608 bytes used, 3836608 available, 16777216 total] 16384K bytes of
processor board System flash (Read ONLY)
i know there is not enough space. The problem is during the before the
download the router does not ask erase flash before download.
How do i change processor board System flash to (Read/Write)
Thanks,
SD
---------------------------------
Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates
starting at 1"/min.
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:05 ART