From: msaeed@uaeu.ac.ae
Date: Sat Oct 07 2006 - 15:23:58 ART
Thank you I have figured out the problem, some how R5 was not authenticating with BB3, I removed all ntp related config and reapplied and it worked.
Thanks again
----- Original Message -----
From: msaeed@uaeu.ac.ae
Date: Saturday, October 7, 2006 2:01 pm
Subject: NTP Issue. IE Lab 9 task 10.2
> Hi,
>
> R5--->SW1---->BB3
>
> on BB3 NTP Stratum is 4
>
> BB3#sh ntp status
> Clock is synchronized, stratum 4, reference is 127.127.7.1
>
> on SW1 after giving ntp server BB3's IP
>
> Rack1SW1#sh ntp status
> Clock is synchronized, stratum 5, reference is 204.12.1.254
>
> Correct, but on R5, after giving ntp server BB3's IP
>
> Rack1R5#sh ntp associations
>
> address ref clock st when poll reach delay
> offset disp
> *~148.1.57.7 204.12.1.254 5 31 64 377 6.5
> -1.34 0.5
> ~204.12.1.254 127.127.7.1 16 934 1024 0 7.8 -
> 0.48
> 16000.
>
> It shows the stratum of BB3 16, and of SW1 5, Can any one explain why
> startum of BB3 is jumping from 5 to 16 when it reaches to R5, when its
> supossed to be 5?
>
> and thats why R5 is getting time from SW1 rather than BB3...
>
> Rack1R5#sh ntp status
> Clock is synchronized, stratum 6, reference is 148.1.57.7
>
> Regards,
>
> Mohammad Zahid Saeed
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART