*shr* type?

From: Zikopoulos Aristomenis (azik@altec.gr)
Date: Fri Oct 06 2006 - 04:19:29 ART

• Next message: Ivan: "Re: Nested Policy Map Question"
• Previous message: Sam Lai: "RE: easy vpn - XAUTH issue"
• Next in thread: Ivan: "Re: *shr* type?"
• Maybe reply: Ivan: "Re: *shr* type?"
• Maybe reply: Chee Chew Leong: "Re: *shr* type?"
• Maybe reply: Spyros Kranis: "RE: *shr* type?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Group,
I have always seen link type is P2P in spanning tree but here f0/11 shows * Shr*.
What is the *shr* type?

VLAN0063
  Spanning tree enabled protocol ieee
  Root ID Priority 32831
             Address 0005.ddc2.1b00
             This bridge is the root
             Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
          
  Bridge ID Priority 32831 (priority 32768 sys-id-ext 63)
             Address 0005.ddc2.1b00
             Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
             Aging Time 300
          
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- -------- --------------------------------
Gi0/1 Desg FWD 4 128.1 P2p
Gi0/2 Desg FWD 4 128.2 P2p
Gi0/3 Desg FWD 4 128.3 P2p
Gi0/6 Desg FWD 19 128.6 P2p
Gi0/7 Desg FWD 100 128.7 Shr

Regards,
Aris

• Next message: Ivan: "Re: Nested Policy Map Question"
• Previous message: Sam Lai: "RE: easy vpn - XAUTH issue"
• Next in thread: Ivan: "Re: *shr* type?"
• Maybe reply: Ivan: "Re: *shr* type?"
• Maybe reply: Chee Chew Leong: "Re: *shr* type?"
• Maybe reply: Spyros Kranis: "RE: *shr* type?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Nov 01 2006 - 07:29:04 ART