From: Russell Kelly \(rukelly\) (rukelly@cisco.com)
Date: Fri Sep 29 2006 - 13:33:30 ART
Thanks Brian,
- I used to see the back to back with the old R&S labs (well some of
them) and was wondering if the SP (the new owner of ATM) called for just
this, or more - I assume for MPLS et al the new SP IE wkbk will call for
an ATM switch then? :-)
Ta
R
-----Original Message-----
From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
Sent: 29 September 2006 15:07
To: Tony Schaffran; Russell Kelly (rukelly); ccielab@groupstudy.com
Subject: RE: ATM Topology Required For SP Lab
To run cell mode MPLS you need an MPLS aware ATM switch such as
the LS1010. If you just want to do basic PVCs when you can run ATM back
to back.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Tony Schaffran
> Sent: Friday, September 29, 2006 8:42 AM
> To: 'Russell Kelly (rukelly)'; ccielab@groupstudy.com
> Subject: RE: ATM Topology Required For SP Lab
>
> You cannot configure any kind of SVC with a back-to-back ATM
connection
> between two routers.
>
> There is probably more you cannot do, but that one is pretty
significant.
>
> Tony Schaffran
> Network Analyst
> CCIE #11071
> CCNP, CCNA, CCDA,
> NNCDS, NNCSS, CNE, MCSE
>
> www.cconlinelabs.com
> Your #1 choice for online Cisco rack rentals.
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Russell Kelly (rukelly)
> Sent: Friday, September 29, 2006 3:29 AM
> To: ccielab@groupstudy.com
> Subject: ATM Topology Required For SP Lab
>
>
> Hi All,
>
> Just looking for some advice on the ATM topology required for the SP
> workbooks (upcoming for ie) and the ipexpert SP workbook. It looks
like
> I cold get away with a back-to-back ATM connection without the need
for
> an LS1010 or the like. Is this the case - has someone set this up
> recently who could help out?
>
> Cheers
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART