From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Thu Sep 28 2006 - 00:36:28 ART
Are you saying the NBMA mode command wasn't accepted by the IOS or are
you saying that it gave you a warning message when you applied to
command?
HTH,
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
msaeed@uaeu.ac.ae
Sent: Wednesday, September 27, 2006 8:01 PM
To: ccielab@groupstudy.com
Subject: IP PIM NBMA Mode for int in sparse-dense-mode
IEWB Lab 8 Task 5.4 Solution says put ip pim nbma mode under serial0/0
on R1 when serial 0/0 is in sparse-dense-mode, router does not accept
this command for an interface when it is in Sprase-dense-mode? So, even
when I change it to sparse mode and gave that ip pim nbma mode command,
it didn't work, has any one tried some other solution?
Regards,
Mohammad Zahid Saeed
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART