From: pablo.smiraglia@verizon.com
Date: Fri Sep 22 2006 - 14:34:49 ART
you could configure both ports as switchports in, let's say vlan40. Then
you configure the ip address 10.1.1.2/24 on "interfave vlan40". you can
then configure your pc with address 10.1.1.5/24
this pretty much does it unless, of course, you HAVE to configure port
f0/1 as L3. If that's the case, I cannot think of a way to do it, given
that IOS does not let you configure 2 interfaces on the same subnet... you
could try playing with PBR and/or splitting the /24 in 2 x /25s... not
sure if you want to go that far though. AFAIK, IRB is not supported on
C3500s.
hope this helps,
pablo.
"2nd CCIE" <doubleccie@yahoo.com>
Sent by: nobody@groupstudy.com
09/22/2006 12:22 PM
Please respond to
"2nd CCIE" <doubleccie@yahoo.com>
To
ccielab@groupstudy.com, security@groupstudy.com
cc
Subject
router port on 3350
Folks
I have a confusion here
R1----------------------(f0/1)SW(f0/5)---------PC
R1 is connected to L3 port of the 3550 switch
R1 fast ethernet port is 10.1.1.1 /24
Fast0/1 on Sw is configured as L3 port with IP addres 10.1.1.2/24
!
interface FastEthernet0/1
description To R1
no switchport
ip address 10.1.1.2 255.255.255.0
!
I wonder , is there anyway that i put the PC on the same subnet with
both the switch and the router ?? say ip add 10.1.1.5/24 ??
appreciate any input
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small
Business.
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART