From: 2nd CCIE (doubleccie@yahoo.com)
Date: Fri Sep 22 2006 - 15:06:16 ART
Hi
Thanks for your input ..but this is the normal way of doing it
My question is that when the port on the switch is L3 port , is there any way for PC to communicate with that port on the same subnet ?
Kal Han <calikali2006@gmail.com> wrote:
Hi
Instead of creating the port itself as layer 3 port
you can create a layer 3 vlan.
So your config on the switch will be something like this.
interface vlan 100
ip addr 10.1.1.2 255.255.255.0
no shut
int fa0/1 ( connected to router -> ip 10.1.1.1 )
switchport mode access
switchport access vlan 100
int fa0/2 ( connected to PC -> ip 10.1.1.5 )
switchport mode access
switchport access vlan 100
This way you pc, router and switch can all talk to eachother
over layer 3.
Kal
On 9/22/06, 2nd CCIE <doubleccie@yahoo.com> wrote: Folks
I have a confusion here
R1----------------------(f0/1)SW(f0/5)---------PC
R1 is connected to L3 port of the 3550 switch
R1 fast ethernet port is 10.1.1.1 /24
Fast0/1 on Sw is configured as L3 port with IP addres 10.1.1.2/24
!
interface FastEthernet0/1
description To R1
no switchport
ip address 10.1.1.2 255.255.255.0
!
I wonder , is there anyway that i put the PC on the same subnet with both the switch and the router ?? say ip add 10.1.1.5/24 ??
appreciate any input
---------------------------------
Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.
---------------------------------
Do you Yahoo!?
Next-gen email? Have it all with the all-new Yahoo! Mail.
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART