From: Brad Ellis (brad@ccbootcamp.com)
Date: Fri Sep 22 2006 - 14:26:48 ART
Yes, you can use either the NM-CUE or AIM-CUE. It should make zero
difference for your CCIE Voice studies. :)
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: "Jojo jojo" <barrerj1@hotmail.com>
To: <brad@ccbootcamp.com>
Sent: Friday, September 22, 2006 10:15 AM
Subject: Re: ccie voice Lab equipment
Brad,
Can we substitute the NM-CUE with a AIM-CUE, i know less space but probably
all we need is 2 mailboxes in the CME -CUE integration
Thanks
>From: "Brad Ellis" <brad@ccbootcamp.com>
>Reply-To: "Brad Ellis" <brad@ccbootcamp.com>
>To: <ccielab@cox.net>, "Jojo jojo" <barrerj1@hotmail.com>
>CC: <ccielab@groupstudy.com>, "WEBBER, ROBERT M (CALLISMA)"
><rw5842@att.com>
>Subject: Re: ccie voice Lab equipment
>Date: Fri, 22 Sep 2006 09:15:14 -0700
>
>We dont have any type of remote access for the analog phones nor faxes in
>our remote equipment. The costs to do that type of implementation didn't
>seem to outweigh the benefits. If you want to play with those, you'll have
>to attend a boot camp at our facility in las vegas. :)
>
>Yes, Mr. Rob Webber will be updating our material to reflect the new
>written exam. I'm not sure when he will be finished with the updates, but
>he IS aware of them.
>
>thanks,
>Brad Ellis
>CCIE#5796 (R&S / Security)
>CCSI#30482
>brad@ccbootcamp.com
>www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
>Voice: 702-968-5100
>FAX: 702-446-8012
>----- Original Message ----- From: <ccielab@cox.net>
>To: "Brad Ellis" <brad@ccbootcamp.com>; "Jojo jojo" <barrerj1@hotmail.com>
>Cc: <ccielab@groupstudy.com>
>Sent: Friday, September 22, 2006 8:41 AM
>Subject: Re: ccie voice Lab equipment
>
>
>Brad,
>How do you operate the analog phone and fax remotely in your racks?
>
>Also, do you plan on updates for your voice workbook for the written exam
>based on the announced changes on Oct. 31.
>
>Thanks
>
>
>---- Brad Ellis <brad@ccbootcamp.com> wrote:
>>If you want to really get creative, you can take a pc with a fax/modem and
>>connect it to the analog port. Setup VNC on the pc, and you can remotely
>>control the pc to dial calls, and then you watch it to see if the modem
>>line
>>would ring when it was supposed to receive calls as well. :)
>>
>>thanks,
>>Brad Ellis
>>CCIE#5796 (R&S / Security)
>>CCSI#30482
>>brad@ccbootcamp.com
>>www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
>>Voice: 702-968-5100
>>FAX: 702-446-8012
>>----- Original Message ----- From: "Jojo jojo" <barrerj1@hotmail.com>
>>To: <ccielab@cox.net>; <brad@ccbootcamp.com>
>>Cc: <ccielab@groupstudy.com>
>>Sent: Thursday, September 21, 2006 2:03 PM
>>Subject: Re: ccie voice Lab equipment
>>
>>
>>
>>You can use IP communicator to dial the number, if you are to far you wont
>>be able to hear the phone ring, however, debug commands or show voice port
>>summary can show you the state of the port
>>
>>Hth
>>JoJo
>>
>> >From: <ccielab@cox.net>
>> >To: Brad Ellis <brad@ccbootcamp.com>, Jojo jojo <barrerj1@hotmail.com>
>> >CC: Cisco certification <ccielab@groupstudy.com>
>> >Subject: Re: ccie voice Lab equipment
>> >Date: Thu, 21 Sep 2006 16:59:16 -0400
>> >
>> >How do you access the device on the fxs port remotely?
>> >My lab is in another room and I need a way to dial the analog phone?
>> >
>> >
>> >
>> >
>> >---- Brad Ellis <brad@ccbootcamp.com> wrote:
>> > > A PVDM2-16 should be sufficient for all of the routers except one.
>>In
>> >one
>> > > of them, a couple months ago, we added an extra PVDM2-8 to handle
>> > > conferencing.
>> > >
>> > > thanks,
>> > > Brad Ellis
>> > > CCIE#5796 (R&S / Security)
>> > > CCSI#30482
>> > > brad@ccbootcamp.com
>> > > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental > >
>>Racks)
>> > > Voice: 702-968-5100
>> > > FAX: 702-446-8012
>> > > ----- Original Message -----
>> > > From: "Jojo jojo" <barrerj1@hotmail.com>
>> > > To: <brad@ccbootcamp.com>
>> > > Sent: Thursday, September 21, 2006 7:48 AM
>> > > Subject: Re: ccie voice Lab equipment
>> > >
>> > >
>> > > Brad,
>> > >
>> > > How many DSPs do we need to complete the labs from your workbook?
>>Will
>> > > PVDM2-16 will be sufficient
>> > >
>> > > here is my list of equipment Im putting together to practice.
>> > >
>> > > For remote sites and central site I'm going with 2801 and for PSTN
>> >simulator
>> > > 2811
>> > >
>> > > Thanks
>> > > Jbarera
>> > >
>> > > HQ Site Qty
>> > > Cisco 2801 1
>> > > VWIC-2MFT-T1 1
>> > > Cisco IP 7940 5
>> > > Cisco 7960 1
>> > > Cisco 3550-24 1
>> > > Cisco PVDM2-16 1
>> > >
>> > >
>> > > Site B
>> > > Cisco 2801 1
>> > > VWIC-2MFT-T1 1
>> > > Cisco ATA 186 1
>> > > Cisco HWIC-4ESW-POE 1
>> > > Cisco PVDM2-16 1
>> > >
>> > > Site C
>> > > Cisco 2801 1
>> > > VWIC-1MFT-E1 1
>> > > Cisco 3550-24 1
>> > > NM-CUE 1
>> > >
>> > > PSTN
>> > > Cisco 2811 1
>> > > PVDM2-48 1
>> > > VWIC-2MFT-T1 2
>> > > VWIC-1MFT-E1 1
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > > >From: "Brad Ellis" <brad@ccbootcamp.com>
>> > > >Reply-To: "Brad Ellis" <brad@ccbootcamp.com>
>> > > >To: <ccielab@cox.net>
>> > > >CC: <ccielab@groupstudy.com>
>> > > >Subject: Re: ccie voice Lab equipment
>> > > >Date: Thu, 21 Sep 2006 06:57:36 -0700
>> > > >
>> > > >No special commands, the router will recognize the PVDM2s. How many
>> > > >channels do you want to use on the T1?
>> > > >
>> > > >thanks,
>> > > >Brad Ellis
>> > > >CCIE#5796 (R&S / Security)
>> > > >CCSI#30482
>> > > >brad@ccbootcamp.com
>> > > >www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
>> >Racks)
>> > > >Voice: 702-968-5100
>> > > >FAX: 702-446-8012
>> > > >----- Original Message ----- From: <ccielab@cox.net>
>> > > >To: "Brad Ellis" <brad@ccbootcamp.com>
>> > > >Cc: <ccielab@groupstudy.com>
>> > > >Sent: Thursday, September 21, 2006 5:09 AM
>> > > >Subject: Re: ccie voice Lab equipment
>> > > >
>> > > >
>> > > >Is there special commands to associate the dsp to the vwic t1 card?
>> > > >How many dsp do I need for just one T1 interface?
>> > > >
>> > > >
>> > > >---- Brad Ellis <brad@ccbootcamp.com> wrote:
>> > > >>Yes, stick the VWIC in the HWIC slot on the 2800/3800 router, but >
>> > >>you
>> >will
>> > > >>need PVDM2's (DSPs) on the router's motherboard for the router to >
>> > >>use
>> >the
>> > > >>VWIC.
>> > > >>
>> > > >>For you PBX trunk:
>> > > >>
>> > > >>router-vwic+dsp's is the way to go IMHO
>> > > >>
>> > > >>thanks,
>> > > >>Brad Ellis
>> > > >>CCIE#5796 (R&S / Security)
>> > > >>CCSI#30482
>> > > >>Network Learning Inc - A Cisco Learning Partner (CLP)
>> > > >>YES! We take Cisco Learning credits!
>> > > >>brad@ccbootcamp.com
>> > > >>www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
>> >Racks)
>> > > >>Voice: 702-968-5100
>> > > >>FAX: 702-446-8012
>> > > >>----- Original Message ----- From: <ccielab@cox.net>
>> > > >>To: "Brad Ellis" <brad@ccbootcamp.com>
>> > > >>Cc: <ccielab@groupstudy.com>
>> > > >>Sent: Wednesday, September 20, 2006 12:21 PM
>> > > >>Subject: Re: ccie voice Lab equipment
>> > > >>
>> > > >>
>> > > >>Can I put a VWIC-2MFT1 in the HWIC slot of the 28/3800 series > >
>> >>routers?
>> > Or
>> > > >>do I need to add onboard DSP modules to support them.
>> > > >>Is there a good link to describe this?
>> > > >>
>> > > >>I need a 2800 with on T1 interface to a PBX. What is the best > >
>> >>config,
>> > > >>router-vwic+dsp's or
>> > > >>router-nm-hd-ve-vwic (dsp onboard nm card)
>> > > >>
>> > > >>Thanks for your help
>> > > >>
>> > > >>---- Brad Ellis <brad@ccbootcamp.com> wrote:
>> > > >> > JP,
>> > > >> >
>> > > >> > Sure, you can use XM routers, just get the NM-HDV cards with > >
>> >> > PVDMs
>> >and
>> > > >> > the
>> > > >> > appropriate voice wic cards.
>> > > >> >
>> > > >> > For a physical difference on the cat 3550s, look at the front of
>> >your >
>> > > >>Cat
>> > > >> > 3550. On the top right side, it will actually say "INLINE
>>POWER"
>> >and >
>> > > >>the
>> > > >> > GBIC slots will be lined up on top of each other if the unit has
>> >inline
>> > > >> > power. (If the unit does NOT have inline power, the GBICs will
>> > > >> > be
>> > > >> > horizontally next to each other)
>> > > >> >
>> > > >> > thanks,
>> > > >> > Brad Ellis
>> > > >> > CCIE#5796 (R&S / Security)
>> > > >> > CCSI#30482
>> > > >> > brad@ccbootcamp.com
>> > > >> > www.ccbootcamp.com (Cisco Training and Advanced Technology
>>Rental
>> > > >> > Voice: 702-968-5100
>> > > >> > FAX: 702-446-8012
>> > > >> > ----- Original Message ----- > From: <jatinder.p.singh@bt.com>
>> > > >> > To: <brad@ccbootcamp.com>
>> > > >> > Sent: Wednesday, September 20, 2006 3:46 AM
>> > > >> > Subject: ccie voice Lab equipment
>> > > >> >
>> > > >> >
>> > > >> > > Brad,
>> > > >> > >
>> > > >> > > Can we use 2621XM in place of 2811 routers. And can you please
>> > > >>specify
>> > > >> > > in detail if I will use 2621XM what cards I required to set up
>> >the >
>> > > >> > full
>> > > >> > > lab.
>> > > >> > > I have 3550 switch but I don't know that it was with inline >
>> > >> > > power
>> >or
>> > > >> > > not
>> > > >> > > how I can check ??
>> > > >> > >
>> > > >> > > Can you please specify in detail because I have to place a > >
>> >> > > order
>> >for
>> > > >> > > the
>> > > >> > > hardware.
>> > > >> > > I already have
>> > > >> > > a.. 6 Cisco 7960G IP Phones
>> > > >> > > a.. 1 Catalyst 6503 w/ Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
>> > > >> > > Software of cisco call manager and cisco unity.
>> > > >> > > I also have hardware which I have used for routing and > > >>
>> > > switching
>> >lab.
>> > > >> > >
>> > > >> > > Thanks in Advance.
>> > > >> > >
>> > > >> > >
>> > > >> > > Best Regards
>> > > >> > >
>> > > >> > > J P Singh | CCIE:- 13620 | Specialist: Design, Development & >
>> > > >> > > >
>> > > >>Consultancy
>> > > >> > > Services | Solutions Engineering Group , BT Global Services |
>> >Tel:+44
>> > > >> > > (0)1732 475950 | Mob:+44 (0)7918 886985 | Fax:+44 (0)1732
>> >452335 |
>> > > >> > > BT
>> > > >> > > Meet Me: 0870 241 1409 Participants Pass code: 33976421 | E:
>> > > >> > > jatinder.p.singh@bt.com | www.bt.com/globalservices
>> > > >> > >
>> > > >> > > British Telecommunications plc
>> > > >> > > Registered office: 81 Newgate Street London EC1A 7AJ
>> > > >> > > Registered in England no. 1800000.
>> > > >> > > This electronic message contains information from British
>> > > >> > > Telecommunications plc which may be privileged or
>>confidential.
>> >The
>> > > >> > > information is intended to be for the use of the individual(s)
>> > > >> > > or
>> > > >
>> > > >>entity
>> > > >> > > named above. If you are not the intended recipient be aware >
>> > >> > > that
>> >any
>> > > >> > > disclosure, copying, distribution or use of the contents of >
>> > >> > > this
>> > > >> > > information is prohibited. If you have received this
>>electronic > > >> > > >
>> > >
>> > > >>message
>> > > >> > > in error, please notify us by telephone or email (to the > >
>> >> > > numbers
>> >or
>> > > >> > > address above) immediately.
>> > > >> > >
>> > > >> > >
>> > > >> > > -----Original Message-----
>> > > >> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>> >Behalf
>> > > >> > > Of
>> > > >> > > Brad Ellis
>> > > >> > > Sent: 06 September 2006 17:29
>> > > >> > > To: tony hall; ccielab@groupstudy.com
>> > > >> > > Subject: Re: ccie voice [bcc][faked-from]
>> > > >> > >
>> > > >> > >
>> > > >> > > Tony,
>> > > >> > >
>> > > >> > > Hi! Here's what we have in our racks and it works really
>>well:
>> > > >> > >
>> > > >> > > a.. 3 Cisco 2811s running 12.4(2)T (HQ, Branch 1, Branch 2)
>> > > >> > > a.. 1 Cisco Catalyst 3550 w/ POE running EMI code
>> > > >> > > a.. 6 Cisco 7960G IP Phones
>> > > >> > > a.. 1 Catalyst 6503 w/ Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
>> > > >> > > a.. 1 VG248
>> > > >> > > a.. 1 Server w/ CallManager 4.1(3) and IPCC Express
>> > > >> > > a.. 1 Server w/ Unity 4.0(5)
>> > > >> > > a.. 1 Cisco 2811 for PSTN/WAN cloud
>> > > >> > > a.. 1 NM-CUE (Cisco Unity Express Network Module)
>> > > >> > >
>> > > >> > > Just dont forget the PVMD2's in the 2811 routers. :)
>> > > >> > >
>> > > >> > > thanks,
>> > > >> > > Brad Ellis
>> > > >> > > CCIE#5796 (R&S / Security)
>> > > >> > > CCSI#30482
>> > > >> > > Network Learning Inc
>> > > >> > > www.ccbootcamp.com (Cisco Training and Advanced Technology > >
>> >> > > Rental
>> > > >
>> > > >>Racks)
>> > > >> > > ----- Original Message ----- > > From: "tony hall"
>> > > >><tony_hall123@hotmail.co.uk>
>> > > >> > > To: <ccielab@groupstudy.com>
>> > > >> > > Sent: Wednesday, September 06, 2006 2:51 AM
>> > > >> > > Subject: ccie voice [bcc][faked-from]
>> > > >> > >
>> > > >> > >
>> > > >> > >> Hi,
>> > > >> > >> can someome give me the idea that , what equipments I need to
>> >build
>> > > >> > >> Voice lab.
>> > > >> > >>
>> > > >> > >> Regards.
>> > > >> > >> TONY.
>> > > >> > >>
>> > > >> > >>
>> >_________________________________________________________________
>> > > >> > >> Windows Live Messenger has arrived. Click here to download
>>it
>> >for
>> > > >> > >> free! http://imagine-msn.com/messenger/launch80/?locale=en-gb
>> > > >> > >>
>> > > >> > >>
>> > >
>> >>______________________________________________________________________
>> > > >> > >> _
>> > > >> > >> Subscription information may be found at:
>> > > >> > >> http://www.groupstudy.com/list/CCIELab.html
>> > > >> > >
>> > > >> > >
>> > >
>> >
>> >>_______________________________________________________________________
>> > > >> > > Subscription information may be found at:
>> > > >> > > http://www.groupstudy.com/list/CCIELab.html
>> > > >> >
>> > > >> >
>> >_______________________________________________________________________
>> > > >> > Subscription information may be found at:
>> > > >> > http://www.groupstudy.com/list/CCIELab.html
>> > > >>
>> > >
>> >
>> >>_______________________________________________________________________
>> > > >>Subscription information may be found at:
>> > > >>http://www.groupstudy.com/list/CCIELab.html
>> > > >
>> > >
>> >_______________________________________________________________________
>> > > >Subscription information may be found at:
>> > > >http://www.groupstudy.com/list/CCIELab.html
>> > >
>> > >
>>_______________________________________________________________________
>> > > Subscription information may be found at:
>> > > http://www.groupstudy.com/list/CCIELab.html
>>
>>_______________________________________________________________________
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART