From: Jojo jojo (barrerj1@hotmail.com)
Date: Thu Sep 21 2006 - 18:03:01 ART
You can use IP communicator to dial the number, if you are to far you wont
be able to hear the phone ring, however, debug commands or show voice port
summary can show you the state of the port
Hth
JoJo
>From: <ccielab@cox.net>
>To: Brad Ellis <brad@ccbootcamp.com>, Jojo jojo <barrerj1@hotmail.com>
>CC: Cisco certification <ccielab@groupstudy.com>
>Subject: Re: ccie voice Lab equipment
>Date: Thu, 21 Sep 2006 16:59:16 -0400
>
>How do you access the device on the fxs port remotely?
>My lab is in another room and I need a way to dial the analog phone?
>
>
>
>
>---- Brad Ellis <brad@ccbootcamp.com> wrote:
> > A PVDM2-16 should be sufficient for all of the routers except one. In
>one
> > of them, a couple months ago, we added an extra PVDM2-8 to handle
> > conferencing.
> >
> > thanks,
> > Brad Ellis
> > CCIE#5796 (R&S / Security)
> > CCSI#30482
> > brad@ccbootcamp.com
> > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
> > Voice: 702-968-5100
> > FAX: 702-446-8012
> > ----- Original Message -----
> > From: "Jojo jojo" <barrerj1@hotmail.com>
> > To: <brad@ccbootcamp.com>
> > Sent: Thursday, September 21, 2006 7:48 AM
> > Subject: Re: ccie voice Lab equipment
> >
> >
> > Brad,
> >
> > How many DSPs do we need to complete the labs from your workbook? Will
> > PVDM2-16 will be sufficient
> >
> > here is my list of equipment Im putting together to practice.
> >
> > For remote sites and central site I'm going with 2801 and for PSTN
>simulator
> > 2811
> >
> > Thanks
> > Jbarera
> >
> > HQ Site Qty
> > Cisco 2801 1
> > VWIC-2MFT-T1 1
> > Cisco IP 7940 5
> > Cisco 7960 1
> > Cisco 3550-24 1
> > Cisco PVDM2-16 1
> >
> >
> > Site B
> > Cisco 2801 1
> > VWIC-2MFT-T1 1
> > Cisco ATA 186 1
> > Cisco HWIC-4ESW-POE 1
> > Cisco PVDM2-16 1
> >
> > Site C
> > Cisco 2801 1
> > VWIC-1MFT-E1 1
> > Cisco 3550-24 1
> > NM-CUE 1
> >
> > PSTN
> > Cisco 2811 1
> > PVDM2-48 1
> > VWIC-2MFT-T1 2
> > VWIC-1MFT-E1 1
> >
> >
> >
> >
> >
> >
> > >From: "Brad Ellis" <brad@ccbootcamp.com>
> > >Reply-To: "Brad Ellis" <brad@ccbootcamp.com>
> > >To: <ccielab@cox.net>
> > >CC: <ccielab@groupstudy.com>
> > >Subject: Re: ccie voice Lab equipment
> > >Date: Thu, 21 Sep 2006 06:57:36 -0700
> > >
> > >No special commands, the router will recognize the PVDM2s. How many
> > >channels do you want to use on the T1?
> > >
> > >thanks,
> > >Brad Ellis
> > >CCIE#5796 (R&S / Security)
> > >CCSI#30482
> > >brad@ccbootcamp.com
> > >www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
>Racks)
> > >Voice: 702-968-5100
> > >FAX: 702-446-8012
> > >----- Original Message ----- From: <ccielab@cox.net>
> > >To: "Brad Ellis" <brad@ccbootcamp.com>
> > >Cc: <ccielab@groupstudy.com>
> > >Sent: Thursday, September 21, 2006 5:09 AM
> > >Subject: Re: ccie voice Lab equipment
> > >
> > >
> > >Is there special commands to associate the dsp to the vwic t1 card?
> > >How many dsp do I need for just one T1 interface?
> > >
> > >
> > >---- Brad Ellis <brad@ccbootcamp.com> wrote:
> > >>Yes, stick the VWIC in the HWIC slot on the 2800/3800 router, but you
>will
> > >>need PVDM2's (DSPs) on the router's motherboard for the router to use
>the
> > >>VWIC.
> > >>
> > >>For you PBX trunk:
> > >>
> > >>router-vwic+dsp's is the way to go IMHO
> > >>
> > >>thanks,
> > >>Brad Ellis
> > >>CCIE#5796 (R&S / Security)
> > >>CCSI#30482
> > >>Network Learning Inc - A Cisco Learning Partner (CLP)
> > >>YES! We take Cisco Learning credits!
> > >>brad@ccbootcamp.com
> > >>www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
>Racks)
> > >>Voice: 702-968-5100
> > >>FAX: 702-446-8012
> > >>----- Original Message ----- From: <ccielab@cox.net>
> > >>To: "Brad Ellis" <brad@ccbootcamp.com>
> > >>Cc: <ccielab@groupstudy.com>
> > >>Sent: Wednesday, September 20, 2006 12:21 PM
> > >>Subject: Re: ccie voice Lab equipment
> > >>
> > >>
> > >>Can I put a VWIC-2MFT1 in the HWIC slot of the 28/3800 series routers?
> Or
> > >>do I need to add onboard DSP modules to support them.
> > >>Is there a good link to describe this?
> > >>
> > >>I need a 2800 with on T1 interface to a PBX. What is the best config,
> > >>router-vwic+dsp's or
> > >>router-nm-hd-ve-vwic (dsp onboard nm card)
> > >>
> > >>Thanks for your help
> > >>
> > >>---- Brad Ellis <brad@ccbootcamp.com> wrote:
> > >> > JP,
> > >> >
> > >> > Sure, you can use XM routers, just get the NM-HDV cards with PVDMs
>and
> > >> > the
> > >> > appropriate voice wic cards.
> > >> >
> > >> > For a physical difference on the cat 3550s, look at the front of
>your >
> > >>Cat
> > >> > 3550. On the top right side, it will actually say "INLINE POWER"
>and >
> > >>the
> > >> > GBIC slots will be lined up on top of each other if the unit has
>inline
> > >> > power. (If the unit does NOT have inline power, the GBICs will be
> > >> > horizontally next to each other)
> > >> >
> > >> > thanks,
> > >> > Brad Ellis
> > >> > CCIE#5796 (R&S / Security)
> > >> > CCSI#30482
> > >> > brad@ccbootcamp.com
> > >> > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
> > >> > Voice: 702-968-5100
> > >> > FAX: 702-446-8012
> > >> > ----- Original Message ----- > From: <jatinder.p.singh@bt.com>
> > >> > To: <brad@ccbootcamp.com>
> > >> > Sent: Wednesday, September 20, 2006 3:46 AM
> > >> > Subject: ccie voice Lab equipment
> > >> >
> > >> >
> > >> > > Brad,
> > >> > >
> > >> > > Can we use 2621XM in place of 2811 routers. And can you please
> > >>specify
> > >> > > in detail if I will use 2621XM what cards I required to set up
>the >
> > >> > full
> > >> > > lab.
> > >> > > I have 3550 switch but I don't know that it was with inline power
>or
> > >> > > not
> > >> > > how I can check ??
> > >> > >
> > >> > > Can you please specify in detail because I have to place a order
>for
> > >> > > the
> > >> > > hardware.
> > >> > > I already have
> > >> > > a.. 6 Cisco 7960G IP Phones
> > >> > > a.. 1 Catalyst 6503 w/ Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
> > >> > > Software of cisco call manager and cisco unity.
> > >> > > I also have hardware which I have used for routing and switching
>lab.
> > >> > >
> > >> > > Thanks in Advance.
> > >> > >
> > >> > >
> > >> > > Best Regards
> > >> > >
> > >> > > J P Singh | CCIE:- 13620 | Specialist: Design, Development & > >
> > >>Consultancy
> > >> > > Services | Solutions Engineering Group , BT Global Services |
>Tel:+44
> > >> > > (0)1732 475950 | Mob:+44 (0)7918 886985 | Fax:+44 (0)1732
>452335 |
> > >> > > BT
> > >> > > Meet Me: 0870 241 1409 Participants Pass code: 33976421 | E:
> > >> > > jatinder.p.singh@bt.com | www.bt.com/globalservices
> > >> > >
> > >> > > British Telecommunications plc
> > >> > > Registered office: 81 Newgate Street London EC1A 7AJ
> > >> > > Registered in England no. 1800000.
> > >> > > This electronic message contains information from British
> > >> > > Telecommunications plc which may be privileged or confidential.
>The
> > >> > > information is intended to be for the use of the individual(s) or
> > >
> > >>entity
> > >> > > named above. If you are not the intended recipient be aware that
>any
> > >> > > disclosure, copying, distribution or use of the contents of this
> > >> > > information is prohibited. If you have received this electronic >
> >
> > >>message
> > >> > > in error, please notify us by telephone or email (to the numbers
>or
> > >> > > address above) immediately.
> > >> > >
> > >> > >
> > >> > > -----Original Message-----
> > >> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf
> > >> > > Of
> > >> > > Brad Ellis
> > >> > > Sent: 06 September 2006 17:29
> > >> > > To: tony hall; ccielab@groupstudy.com
> > >> > > Subject: Re: ccie voice [bcc][faked-from]
> > >> > >
> > >> > >
> > >> > > Tony,
> > >> > >
> > >> > > Hi! Here's what we have in our racks and it works really well:
> > >> > >
> > >> > > a.. 3 Cisco 2811s running 12.4(2)T (HQ, Branch 1, Branch 2)
> > >> > > a.. 1 Cisco Catalyst 3550 w/ POE running EMI code
> > >> > > a.. 6 Cisco 7960G IP Phones
> > >> > > a.. 1 Catalyst 6503 w/ Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
> > >> > > a.. 1 VG248
> > >> > > a.. 1 Server w/ CallManager 4.1(3) and IPCC Express
> > >> > > a.. 1 Server w/ Unity 4.0(5)
> > >> > > a.. 1 Cisco 2811 for PSTN/WAN cloud
> > >> > > a.. 1 NM-CUE (Cisco Unity Express Network Module)
> > >> > >
> > >> > > Just dont forget the PVMD2's in the 2811 routers. :)
> > >> > >
> > >> > > thanks,
> > >> > > Brad Ellis
> > >> > > CCIE#5796 (R&S / Security)
> > >> > > CCSI#30482
> > >> > > Network Learning Inc
> > >> > > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
> > >
> > >>Racks)
> > >> > > ----- Original Message ----- > > From: "tony hall"
> > >><tony_hall123@hotmail.co.uk>
> > >> > > To: <ccielab@groupstudy.com>
> > >> > > Sent: Wednesday, September 06, 2006 2:51 AM
> > >> > > Subject: ccie voice [bcc][faked-from]
> > >> > >
> > >> > >
> > >> > >> Hi,
> > >> > >> can someome give me the idea that , what equipments I need to
>build
> > >> > >> Voice lab.
> > >> > >>
> > >> > >> Regards.
> > >> > >> TONY.
> > >> > >>
> > >> > >>
>_________________________________________________________________
> > >> > >> Windows Live Messenger has arrived. Click here to download it
>for
> > >> > >> free! http://imagine-msn.com/messenger/launch80/?locale=en-gb
> > >> > >>
> > >> > >>
> > >>______________________________________________________________________
> > >> > >> _
> > >> > >> Subscription information may be found at:
> > >> > >> http://www.groupstudy.com/list/CCIELab.html
> > >> > >
> > >> > >
> >
> >>_______________________________________________________________________
> > >> > > Subscription information may be found at:
> > >> > > http://www.groupstudy.com/list/CCIELab.html
> > >> >
> > >> >
>_______________________________________________________________________
> > >> > Subscription information may be found at:
> > >> > http://www.groupstudy.com/list/CCIELab.html
> > >>
> >
> >>_______________________________________________________________________
> > >>Subscription information may be found at:
> > >>http://www.groupstudy.com/list/CCIELab.html
> > >
> > >_______________________________________________________________________
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART