From: Brad Ellis (brad@ccbootcamp.com)
Date: Thu Sep 21 2006 - 13:46:22 ART
Then you'll want at least a PVDM2-32 (One dsp resource per channel). If you
are going to do a bunch of conferencing, then you may need additional DSP
resources.
thanks,
Brad Ellis
CCIE#5796 (R&S / Security)
CCSI#30482
brad@ccbootcamp.com
www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
Voice: 702-968-5100
FAX: 702-446-8012
----- Original Message -----
From: <ccielab@cox.net>
To: "Brad Ellis" <brad@ccbootcamp.com>
Cc: <ccielab@groupstudy.com>
Sent: Thursday, September 21, 2006 7:56 AM
Subject: Re: ccie voice Lab equipment
All 23 channels on the pri
---- Brad Ellis <brad@ccbootcamp.com> wrote:
> No special commands, the router will recognize the PVDM2s. How many
> channels do you want to use on the T1?
>
> thanks,
> Brad Ellis
> CCIE#5796 (R&S / Security)
> CCSI#30482
> brad@ccbootcamp.com
> www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
> Voice: 702-968-5100
> FAX: 702-446-8012
> ----- Original Message -----
> From: <ccielab@cox.net>
> To: "Brad Ellis" <brad@ccbootcamp.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Thursday, September 21, 2006 5:09 AM
> Subject: Re: ccie voice Lab equipment
>
>
> Is there special commands to associate the dsp to the vwic t1 card?
> How many dsp do I need for just one T1 interface?
>
>
> ---- Brad Ellis <brad@ccbootcamp.com> wrote:
> > Yes, stick the VWIC in the HWIC slot on the 2800/3800 router, but you
> > will
> > need PVDM2's (DSPs) on the router's motherboard for the router to use
> > the
> > VWIC.
> >
> > For you PBX trunk:
> >
> > router-vwic+dsp's is the way to go IMHO
> >
> > thanks,
> > Brad Ellis
> > CCIE#5796 (R&S / Security)
> > CCSI#30482
> > Network Learning Inc - A Cisco Learning Partner (CLP)
> > YES! We take Cisco Learning credits!
> > brad@ccbootcamp.com
> > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental Racks)
> > Voice: 702-968-5100
> > FAX: 702-446-8012
> > ----- Original Message -----
> > From: <ccielab@cox.net>
> > To: "Brad Ellis" <brad@ccbootcamp.com>
> > Cc: <ccielab@groupstudy.com>
> > Sent: Wednesday, September 20, 2006 12:21 PM
> > Subject: Re: ccie voice Lab equipment
> >
> >
> > Can I put a VWIC-2MFT1 in the HWIC slot of the 28/3800 series routers?
> > Or
> > do I need to add onboard DSP modules to support them.
> > Is there a good link to describe this?
> >
> > I need a 2800 with on T1 interface to a PBX. What is the best config,
> > router-vwic+dsp's or
> > router-nm-hd-ve-vwic (dsp onboard nm card)
> >
> > Thanks for your help
> >
> > ---- Brad Ellis <brad@ccbootcamp.com> wrote:
> > > JP,
> > >
> > > Sure, you can use XM routers, just get the NM-HDV cards with PVDMs and
> > > the
> > > appropriate voice wic cards.
> > >
> > > For a physical difference on the cat 3550s, look at the front of your
> > > Cat
> > > 3550. On the top right side, it will actually say "INLINE POWER" and
> > > the
> > > GBIC slots will be lined up on top of each other if the unit has
> > > inline
> > > power. (If the unit does NOT have inline power, the GBICs will be
> > > horizontally next to each other)
> > >
> > > thanks,
> > > Brad Ellis
> > > CCIE#5796 (R&S / Security)
> > > CCSI#30482
> > > brad@ccbootcamp.com
> > > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
> > > Voice: 702-968-5100
> > > FAX: 702-446-8012
> > > ----- Original Message -----
> > > From: <jatinder.p.singh@bt.com>
> > > To: <brad@ccbootcamp.com>
> > > Sent: Wednesday, September 20, 2006 3:46 AM
> > > Subject: ccie voice Lab equipment
> > >
> > >
> > > > Brad,
> > > >
> > > > Can we use 2621XM in place of 2811 routers. And can you please
> > > > specify
> > > > in detail if I will use 2621XM what cards I required to set up the
> > > > full
> > > > lab.
> > > > I have 3550 switch but I don't know that it was with inline power or
> > > > not
> > > > how I can check ??
> > > >
> > > > Can you please specify in detail because I have to place a order for
> > > > the
> > > > hardware.
> > > > I already have
> > > > a.. 6 Cisco 7960G IP Phones
> > > > a.. 1 Catalyst 6503 w/ Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
> > > > Software of cisco call manager and cisco unity.
> > > > I also have hardware which I have used for routing and switching
> > > > lab.
> > > >
> > > > Thanks in Advance.
> > > >
> > > >
> > > > Best Regards
> > > >
> > > > J P Singh | CCIE:- 13620 | Specialist: Design, Development &
> > > > Consultancy
> > > > Services | Solutions Engineering Group , BT Global Services |
> > > > Tel:+44
> > > > (0)1732 475950 | Mob:+44 (0)7918 886985 | Fax:+44 (0)1732 452335 |
> > > > BT
> > > > Meet Me: 0870 241 1409 Participants Pass code: 33976421 | E:
> > > > jatinder.p.singh@bt.com | www.bt.com/globalservices
> > > >
> > > > British Telecommunications plc
> > > > Registered office: 81 Newgate Street London EC1A 7AJ
> > > > Registered in England no. 1800000.
> > > > This electronic message contains information from British
> > > > Telecommunications plc which may be privileged or confidential. The
> > > > information is intended to be for the use of the individual(s) or
> > > > entity
> > > > named above. If you are not the intended recipient be aware that any
> > > > disclosure, copying, distribution or use of the contents of this
> > > > information is prohibited. If you have received this electronic
> > > > message
> > > > in error, please notify us by telephone or email (to the numbers or
> > > > address above) immediately.
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > > > Of
> > > > Brad Ellis
> > > > Sent: 06 September 2006 17:29
> > > > To: tony hall; ccielab@groupstudy.com
> > > > Subject: Re: ccie voice [bcc][faked-from]
> > > >
> > > >
> > > > Tony,
> > > >
> > > > Hi! Here's what we have in our racks and it works really well:
> > > >
> > > > a.. 3 Cisco 2811s running 12.4(2)T (HQ, Branch 1, Branch 2)
> > > > a.. 1 Cisco Catalyst 3550 w/ POE running EMI code
> > > > a.. 6 Cisco 7960G IP Phones
> > > > a.. 1 Catalyst 6503 w/ Sup2/MFC2/PFC2,6608-T1,6348-RJ45V
> > > > a.. 1 VG248
> > > > a.. 1 Server w/ CallManager 4.1(3) and IPCC Express
> > > > a.. 1 Server w/ Unity 4.0(5)
> > > > a.. 1 Cisco 2811 for PSTN/WAN cloud
> > > > a.. 1 NM-CUE (Cisco Unity Express Network Module)
> > > >
> > > > Just dont forget the PVMD2's in the 2811 routers. :)
> > > >
> > > > thanks,
> > > > Brad Ellis
> > > > CCIE#5796 (R&S / Security)
> > > > CCSI#30482
> > > > Network Learning Inc
> > > > www.ccbootcamp.com (Cisco Training and Advanced Technology Rental
> > > > Racks)
> > > > ----- Original Message -----
> > > > From: "tony hall" <tony_hall123@hotmail.co.uk>
> > > > To: <ccielab@groupstudy.com>
> > > > Sent: Wednesday, September 06, 2006 2:51 AM
> > > > Subject: ccie voice [bcc][faked-from]
> > > >
> > > >
> > > >> Hi,
> > > >> can someome give me the idea that , what equipments I need to build
> > > >> Voice lab.
> > > >>
> > > >> Regards.
> > > >> TONY.
> > > >>
> > > >> _________________________________________________________________
> > > >> Windows Live Messenger has arrived. Click here to download it for
> > > >> free! http://imagine-msn.com/messenger/launch80/?locale=en-gb
> > > >>
> > > >> ______________________________________________________________________
> > > >> _
> > > >> Subscription information may be found at:
> > > >> http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART