From: Eugene Ward (eward15@juno.com)
Date: Wed Sep 20 2006 - 18:15:27 ART
I don't think you want to do that.
Example:
source---S1===trunk===S2---Sniffer
S1
!
vlan 901
remote-span
!
monitor session 1 source interface Fa0/1
monitor session 1 destination remote vlan 901 reflector-port (a port you are
not using)
!
S2
!
vlan 901
remote-span
!
monitor session 1 source remote vlan 901
monitor session 1 destination interface Fa0/1
!
Make sure you allow vlan 901 across your trunk.
HTH,
Eugene
-----------------------------------------------------------------------------
--------------
Folks,
source---S1===trunk===S2---Sniffer
if i configure the RSPAN and assign the reflector port
to be the trunk port as above from source switch the
trunk goes down. How do we fix this ? F0/13 is a trunk
port.
my config is as follows:
S1
!
monitor session 1 source interface Fa0/1
monitor session 1 destination remote vlan 901
reflector-port Fa0/13
!
S2
!
monitor session 1 destination interface Fa0/1
monitor session 1 source remote vlan 901
!
Any inputs are welcome,
Thank you,
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART