From: Sohail Bhamani (sohail@gmail.com)
Date: Wed Sep 20 2006 - 17:55:32 ART
Your reflector port can not be your trunk port. Once you chose it as your
refelctor, it will stop trunking as well as any hosts plugged into it will
not have reachibility. Try using another unused port for your reflector
port and you will be okay.
Sohail B,
On 9/20/06, xprtofnet <xprtofnet@yahoo.com> wrote:
>
> Folks,
>
> source---S1===trunk===S2---Sniffer
>
> if i configure the RSPAN and assign the reflector port
> to be the trunk port as above from source switch the
> trunk goes down. How do we fix this ? F0/13 is a trunk
> port.
>
> my config is as follows:
> S1
> !
> monitor session 1 source interface Fa0/1
> monitor session 1 destination remote vlan 901
> reflector-port Fa0/13
> !
> S2
> !
> monitor session 1 destination interface Fa0/1
> monitor session 1 source remote vlan 901
> !
>
>
> Any inputs are welcome,
>
> Thank you,
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART