RE: Help on Multicast

From: Michael Zuo (mzuo@ixiacom.com)
Date: Tue Sep 19 2006 - 18:54:29 ART

• Next message: Michael Zuo: "RE: when do we need to redistribute connected"
• Previous message: Leo Boulton: "Virtual-Link over a GRE Tunnel"
• Maybe in reply to: nisha rani: "Help on Multicast"
• Next in thread: Chris Broadway: "Re: Help on Multicast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Does anyone know exactly under what conditions "ip pim nbma" is needed
on the Frame-relay hub router?

Does this only apply to sparse-mode and router having a
point-to-multipoint sub-interface?

thanks

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
nisha rani
Sent: Tuesday, September 12, 2006 1:01 PM
To: Hash Aminu
Cc: Brent Foster; Angelo De Guzman; Cisco certification
Subject: Re: Help on Multicast

Hi all,

Thanks to all of you with your prompt reply. I was missing "ip pim nbma"
command on the hub router and it is working.
Kind regards,

On 12/09/06, Hash Aminu <hashng@gmail.com> wrote:
>
> Hello,
>
> I just Simulate your Scenario and i was able to ping the Group, though
i
> have PIM nbma-mode configured on the frame relay interfaces.
>
> try that out.
> making the Hub the mapping agent and the lo0 interface pim sparse mode
> will
> be ok. if any issues paste your configs please .
>
> Thank you
> Hashiru Aminu
>
>

• Next message: Michael Zuo: "RE: when do we need to redistribute connected"
• Previous message: Leo Boulton: "Virtual-Link over a GRE Tunnel"
• Maybe in reply to: nisha rani: "Help on Multicast"
• Next in thread: Chris Broadway: "Re: Help on Multicast"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:41 ART