From: WorkerBee (ciscobee@gmail.com)
Date: Fri Sep 15 2006 - 23:59:11 ART
Whenever you specify a route-map to the routing protocol being
redistributed, you
need to explicitly specify the connected subnet as well.
If they just redistribute without any route-map, the connected subnet where
that routing protocol is enabled get redistributed.
On 9/16/06, tonynguyenchi <tonynguyenchi.ccie@gmail.com> wrote:
> Dear GS,
>
> When doing redistribute between routing protocols, I used to confuse when it
> is necessary to redistribute connected, when it is not necessary.
>
> Could you please give me some guidance and also some reference if any.
>
> Thanks and best regards,
>
> Tony
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART