From: Fabio Rodrigues (fleandror2@gmail.com)
Date: Thu Sep 14 2006 - 09:11:32 ART
The purpose and the behavior aren't the same, but you can use the interface
command "mls qos vlan-based" (not available in 3550). With this command, you
apply the policies into the Interface VLAN and that policy will works for
all interfaces that belongs to that VLAN and that have this command.
Tks,
Fabio.
----- Original Message -----
From: "Paul Dardinski" <pauld@marshallcomm.com>
To: "Victor Cappuccio" <cvictor@protokolgroup.com>; "Cisco certification"
<ccielab@groupstudy.com>
Sent: Thursday, September 14, 2006 8:47 AM
Subject: RE: per-port per-vlan on 3560
> Note that as of last time I checked, the 3560 also does not support any
> kind of per-vlan egress policing. The 3550 would police on qos
> markings...but the 3560...nada. I actually went through the entire
> escalation with Cisco over this for a customer....it's not supported and
> the only way to approximate the behavior is to fool with the srr queues.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Victor Cappuccio
> Sent: Thursday, September 14, 2006 6:02 AM
> To: 'nikolai'; 'Chee Chew Leong'
> Cc: ccielab@groupstudy.com
> Subject: RE: per-port per-vlan on 3560
>
> Mine does..
>
> Sw1(config-if)#class-map match-all VLAN
> Sw1(config-cmap)#match ?
> access-group Access group
> class-map Class map
> flow Flow based QoS parameters
> ip IP specific values
> vlan VLANs to match
>
> Sw1(config-cmap)#do show ver | in IOS
> Cisco IOS Software, C3550 Software (C3550-I5Q3L2-M), Version 12.2(25)SE,
> RELEASE SOFTWARE (fc)
> Sw1(config-cmap)#do show ver | in memory
> Cisco WS-C3550-24 (PowerPC) processor (revision G0) with 65526K/8192K
> bytes
> of memory.
>
> -----Mensaje original-----
> De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
> nikolai
> Enviado el: Jueves, 14 de Septiembre de 2006 05:27 a.m.
> Para: Chee Chew Leong
> CC: ccielab@groupstudy.com
> Asunto: Re: per-port per-vlan on 3560
>
> Chee Chew Leong wrote:
>>>From the configuration guide and command reference, it don't seem the
> 3560
>
>> switch is doing per-port per-vlan anymore. This means, this command
> Nov,
>> this feature will be taken out from lab.
>>
>> I need the your comments, so that I am more sure on my finding.
>>
>>
> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
> I agree - the 3560 (12.2.25 SED1) in my lab doesn't support "match vlan"
>
> under a class-map:
> ************************************
> SW1(config)#class-map match-all VLAN
> SW1(config-cmap)#match ?
> access-group Access group
> input-interface Select one or more input interfaces to match
> ip IP specific values
> ***************************************
> -- nikolai
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART