From: Paul Dardinski (pauld@marshallcomm.com)
Date: Thu Sep 14 2006 - 08:47:28 ART
Note that as of last time I checked, the 3560 also does not support any
kind of per-vlan egress policing. The 3550 would police on qos
markings...but the 3560...nada. I actually went through the entire
escalation with Cisco over this for a customer....it's not supported and
the only way to approximate the behavior is to fool with the srr queues.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Victor Cappuccio
Sent: Thursday, September 14, 2006 6:02 AM
To: 'nikolai'; 'Chee Chew Leong'
Cc: ccielab@groupstudy.com
Subject: RE: per-port per-vlan on 3560
Mine does..
Sw1(config-if)#class-map match-all VLAN
Sw1(config-cmap)#match ?
access-group Access group
class-map Class map
flow Flow based QoS parameters
ip IP specific values
vlan VLANs to match
Sw1(config-cmap)#do show ver | in IOS
Cisco IOS Software, C3550 Software (C3550-I5Q3L2-M), Version 12.2(25)SE,
RELEASE SOFTWARE (fc)
Sw1(config-cmap)#do show ver | in memory
Cisco WS-C3550-24 (PowerPC) processor (revision G0) with 65526K/8192K
bytes
of memory.
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
nikolai
Enviado el: Jueves, 14 de Septiembre de 2006 05:27 a.m.
Para: Chee Chew Leong
CC: ccielab@groupstudy.com
Asunto: Re: per-port per-vlan on 3560
Chee Chew Leong wrote:
>>From the configuration guide and command reference, it don't seem the
3560
> switch is doing per-port per-vlan anymore. This means, this command
Nov,
> this feature will be taken out from lab.
>
> I need the your comments, so that I am more sure on my finding.
>
>
This archive was generated by hypermail 2.1.4 : Sun Oct 01 2006 - 16:55:40 ART